Version: 2022.3
Scene 视图摄像机

Scene 视图导航

The Scene view has a set of navigation controls to help you move around efficiently:


The Scene Gizmo appears in the Scene view. This displays the Scene view Camera’s current orientation, and allows you to change the viewing angle and projection mode.

The Scene Gizmo has a conical arm on each side of the cube. The arms at the forefront are labelled X, Y, and Z. Click on any of the conical axis arms to snap the Scene view Camera to the axis it represents (for example: top view, left view, and front view). You can also right-click the cube to see a menu with a list of viewing angles. To return to the default viewing angle, right-click the Scene Gizmo and select Free.

You can also toggle Perspective on and off. This changes the projection mode of the Scene view between Perspective and Orthographic (sometimes called “isometric”). To do this, click the cube in the center of the Scene Gizmo, or the text below it. The Orthographic view has no perspective, and is useful in combination with clicking one of the conical axis arms to get a front, top or side elevation.

A Scene shown in Perspective mode (left) and Orthographic mode (right)
A Scene shown in Perspective mode (left) and Orthographic mode (right)
The same Scene viewed in top and right view, in orthographic mode
The same Scene viewed in top and right view, in orthographic mode

If your Scene view is in an awkward viewpoint (upside-down or just an angle you find confusing), Shift-click the cube at the center of the Scene Gizmo to get back to a Perspective view with an angle that looks at the Scene from the side and slightly from above.

Click on the padlock on the top right of the Scene Gizmo to enable or disable rotation of the Scene. Once Scene rotation is disabled, right-click to pan the view instead of rotating it. This is the same as the View tool.

Note that in 2D Mode, the Scene Gizmo doesn’t appear. The only view option in 2d Mode is to look perpendicularly at the XY plane.

Mac 触控板手势

在带触控板的 Mac 上,可用两根手指拖动来缩放视图。

You can also use three fingers to simulate the effect of clicking the arms of the Scene Gizmo: drag up, left, right or down to snap the Scene Camera to the corresponding direction. You must enable three-finger swiping in the MacOS trackpad gesture settings to use this feature.

Move, orbit and zoom in the Scene view

Moving, orbiting, and zooming are key operations in Scene view navigation. Unity provides several ways to perform them for maximum accessibility:

Use the arrow keys

You can use the Arrow Keys to move around the Scene as though “walking” through it. The Up and Down arrow keys move the Camera forward and backward in the direction it faces. The Left and Right arrow keys pan the view sideways. Hold down the Shift and an arrow key to move faster.

Use the View tool

When the View tool is selected (shortcut: Q), the following mouse controls are available:

控件 描述
Pan In View tool mode, the Move icon appears

Click and drag to pan the Camera around.
旋转 When you hold down the Alt button in View tool mode, the Orbit icon appears

Hold Alt (Windows) or Option (macOS), and left-click and drag to orbit the Camera around the current pivot point.

This option isn’t available in 2D mode, because the view is orthographic.

按住 Alt (Windows) 或 Option (macOS),然后单击鼠标右键并拖动可缩放 Scene 视图。

在 macOS 上也可以按住 Control,然后左键单击并拖动。

按住 Shift 可提高移动和缩放的速度。

Use flythrough mode

Use the Flythrough mode to fly around the Scene view in first-person, similar to how you would navigate in many games.

Flythrough mode is designed for Perspective Mode. In Orthographic Mode, if you click and hold the right mouse button and move your mouse, your view orbits the Camera instead.

Flythrough mode isn’t available in 2D mode. In 2D mode, if you click and hold the right mouse button and move your mouse, your view pans around the Scene view.

To enter Flythrough mode and navigate through the Scene view in Flythrough mode:

  1. Click and hold the right mouse button.
  2. Do the following to navigate through the Scene view:
    • Use your mouse to move the view.
    • To move forward or backward, press W or S.
    • To move left or right, press A or D.
    • To move up or down, press Q or E.
    • To move faster, press and hold Shift.

Change the move speed of the camera

The Scene Camera displays the Scene view in the Editor. By default, the Scene Camera is what you control and look through when you navigate through the Scene view.

To change the speed that a Camera moves at in the Scene view, select the Camera icon in the View Options overlay then adjust the value of the Camera Speed property to the speed you want.

Note: To find the View Options overlay, press ` to open the Overlays menu. In the Overlays menu, hover over View Options to highlight the View Options overlay in the Scene view.

In Flythrough mode, use the scroll wheel on your mouse or drag two fingers on a trackpad to change the speed that the Scene Camera moves at through the Scene


For extra efficiency, these controls can also be used regardless of which transform tool is selected. The most convenient controls depend on which mouse or track-pad you are using.

操作 3 键鼠标 2 键鼠标或触控板 只有一个鼠标键或触控板的 Mac
Pan Hold the middle-mouse button then drag 按住 Alt+Control+左键单击,然后拖动 Hold Option+Command+left-click, then drag
旋转__(在 2D 模式中不可用) |按住 Alt+左键单击,然后拖动 |按住 Alt+左键单击,然后拖动 |Hold Option+left-click, then drag | |缩放__ 使用鼠标滚轮,或按住 Alt+右键单击,然后拖动 按住 Alt+右键单击,然后拖动 Use the two-finger swipe method to scroll in and out, or hold Option+Control+left-click, then drag
__更改速度__(仅在飞越模式中可用) 在移动时使用滚轮。 Drag with two fingers while moving Drag with two fingers while moving

Center the view on a GameObject

要将 Scene 视图居中于游戏对象上,请在层级视图中选择该游戏对象,然后将鼠标移到 Scene 视图上并按 F。如果已经选择了游戏对象,按 F 会放大到轴心点。此功能也可在菜单栏中的 Edit > Frame Selected 下找到。

To lock the view to the GameObject even when the GameObject is moving, press Shift+F. This feature is also in the menu bar under Edit > Lock View to Selected.

Scene 视图摄像机