Version: 2018.3 (switch to 2019.1 )
Using the Automatic API Updater
Upgrading to Unity 2018.2
Other Versions

Upgrading to Unity 2018.3

This page lists any changes in 2018.3 which might affect existing projects when you upgrade from earlier versions of Unity


Improved Prefabs

  • PrefabsAn asset type that allows you to store a GameObject complete with components and properties. The prefab acts as a template from which you can create new object instances in the scene. More info
    See in Glossary
    automatically upgrade to the new Prefabs system.
  • To support prefab nesting, the prefab workflow has changed. To edit Prefabs, you now need to open them in Prefab Mode. You can no longer edit Prefabs in the Project Browser.
  • You also make structural changes in Prefab Mode, such as deleting GameObjectsThe fundamental object in Unity scenes, which can represent characters, props, scenery, cameras, waypoints, and more. A GameObject’s functionality is defined by the Components attached to it. More info
    See in Glossary
    , reparenting GameObjects, or replacing a Transform with a RectTransform. Alternatively, you can unpack a Prefab instance if you want to entirely remove its link to its Prefab AssetAny media or data that can be used in your game or Project. An asset may come from a file created outside of Unity, such as a 3D model, an audio file or an image. You can also create some asset types in Unity, such as an Animator Controller, an Audio Mixer or a Render Texture. More info
    See in Glossary
    and thus be able to restructure the resulting plain GameObjects as necessary. You can no longer disconnect a Prefab instance.
  • The Editor tooling that creates GameObjects should use ObjectFactory.CreateGameObject to make sure that the GameObject ends up in the Prefab SceneA Scene contains the environments and menus of your game. Think of each unique Scene file as a unique level. In each Scene, you place your environments, obstacles, and decorations, essentially designing and building your game in pieces. More info
    See in Glossary
    if a Prefab Asset is currently being edited in Prefab Mode.
  • As a safety precaution, scriptsA piece of code that allows you to create your own Components, trigger game events, modify Component properties over time and respond to user input in any way you like. More info
    See in Glossary
    with the [ExecuteInEditMode] attribute cause the Editor to exit Prefab Mode when going into Play Mode, if any script on the open Prefab has that attribute. For details on how to make such scripts compatible with Prefab Mode, see the Scripting Reference pages for ExecuteInEditMode and the new ExecuteAlways attribute.
  • It’s no longer possible to make arbitrary modifications to Prefab Assets from scripts because Prefabs are now imported assets. Instead you need to use PrefabUtility.LoadPrefabContents, PrefabUtility.SaveAsPrefabAsset and PrefabUtility.UnloadPrefabContents.
  • If you use AssetDatabase.AddObjectToAsset to add additional assets to Prefabs, you must now call PrefabUtility.SavePrefabAsset after adding the requisite objects.

USS flex shorthand expansion now follows CSS standard

  • The USS flex directive now accepts up to three parameters representing flex-grow, flex-shrink and flex-basis. The flex-shrink and flex-basis parameters are optional. If omitted, flex-basis defaults to 0 and flex-shrink defaults to 1.
  • Before 2018.3, flex: N was equivalent to flex N 0 auto. This now follows the CSS standard by making it equivalent to flex: N 1 0. To preserve the old semantic, you should replace all flex: N directives with flex: N 0 auto in your USS files.

Support for logging unhandled exceptions in managed user threads

  • Before 2018.3, the Unity Editor did not log unhandled exceptions thrown in managed user threads. From 2018.3 onwards, unhandled exceptions thrown in managed user threads are logged on the Unity Editor console.
  • Because logging now includes all managed user threads, you may see exceptions that have always been thrown in your Projects, but were never emitted to the console until now.

The VFACE shader variable is now inverted in DirectX (11 & 12)

  • The VFACE shaderA small script that contains the mathematical calculations and algorithms for calculating the Color of each pixel rendered, based on the lighting input and the Material configuration. More info
    See in Glossary
    variable was not coherent between DirectX and other graphics APIs when renderingThe process of drawing graphics to the screen (or to a render texture). By default, the main camera in Unity renders its view to the screen. More info
    See in Glossary
    to a cubemapA collection of six square textures that can represent the reflections in an environment or the skybox drawn behind your geometry. The six squares form the faces of an imaginary cube that surrounds an object; each face represents the view along the directions of the world axes (up, down, left, right, forward and back). More info
    See in Glossary
    . Now it has the same behavior.
  • If you are using a VFACE bool shader variable in a DirectX shader to render a cubemap, then you have to flip the logic in your code.
  • See Issue ID 1027670.

Upgraded PhysX from 3.3.1 to 3.4.2

Physics behaviour has changed and some Projects may behave differently with the new version. In particular:

  • The contact patches now contain up to 6 contacts in the Persistent Contact Manifold mode. This is an increase from 5 contacts per patch in previous versions. There is new code that merges patches in the manifold, and new code that selects contacts. CollisionsA collision occurs when the physics engine detects that the colliders of two GameObjects make contact or overlap, when at least one has a rigidbody component and is in motion. More info
    See in Glossary
    appear to be a lot more accurate than before. You may need to work on Projects that rely on a particular arrangement of contacts to make them compatible with the new code. You are most likely to notice this when convex bodies collide with meshes and primitives.
  • A new algorithm is now used to compute contacts with terrains. It used to be special-cased, but now it’s the same mesh-primitive code that is used with MeshColliders. It’s robust, more accurate and performs well. However, it doesn’t support TerrainData.thickness, which means the tunneling effect with terrainsThe landscape in your scene. A Terrain GameObject adds a large flat plane to your scene and you can use the Terrain’s Inspector window to create a detailed landscape. More info
    See in Glossary
    is now possible. To avoid this, you need to enable continuous collision detectionA collision detection method that calculates and resolves collisions over the entire physics simulation step. This can prevent fast-moving objects from tunnelling through walls during a simulation step. More info
    See in Glossary
    on the fast moving objects. Before that, if a body was discovered to be no deeper than TerrainData.thickness under the terrain, it was popped up automatically, but the normals were never correct. To get the old behaviour, uncheck the Enable Unified Heightmaps option in the Physics settings.
  • Negative meshThe main graphics primitive of Unity. Meshes make up a large part of your 3D worlds. Unity supports triangulated or Quadrangulated polygon meshes. Nurbs, Nurms, Subdiv surfaces must be converted to polygons. More info
    See in Glossary
    scaling
    no longer leads directly to mesh baking in all the cases. Concave meshes are not baked any more. However, Convex meshes still need to have scaling to be baked. With this change, negative scaling inverts the mesh normals when scale.x * scale.y * scale.z < 0. Additionally, non-trivial scaling like skew and shear still have to be baked, as before.
  • Convex mesh inflation is deprecated because it doesn’t seem to be needed with the new convex hull computation algorithm (Quickhull) that is more tolerant towards all sorts of imperfections in the input mesh.

The AssetBundle.mainAsset property has been marked Obsolete

  • In Unity versions prior to 5.0, users had to build asset bundles using the AssetBundleBuildAssetBundle API which required providing an Object that would be returned when loaded using the AssetBundle’s mainAsset property.
  • The AssetBundle.BuildAssetBundle API was marked obsolete in Unity 5.0 and was replaced by AssetBundle.BuildAssetBundles, which changed how you get Assets from an AssetBundle.
  • You now need to get the Asset’s name, or path with the AssetBundle.LoadAsset API to get content from the AssetBundle. See documentation on Building AssetBundles, Using AssetBundles Natively, and the AssetBundle Scripting API.

Upgrading Projects that use NavMesh components

  • If you are moving a Project from 2018.2 or earlier to 2018.3b and it uses NavMeshA mesh that Unity generates to approximate the walkable areas and obstacles in your environment for path finding and AI-controlled navigation. More info
    See in Glossary
    components obtained from Unity’s GitHub repository, you now need to use this branch.

Particle System bug fixes

Unity 2018.3 includes some particle bugs fixes and this can affect your projects that were created in a previous version.

  • When using non-uniform Transform scale on billboardA textured 2D object that rotates as it, or the Camera, moves so that it always faces the Camera. See Billboard RendererRenders Billboard Assets, either from a pre-made Asset (exported from SpeedTree) or from a custom-created file that you create using a script at runtime or from a custom editor, for example. More info
    See in Glossary

    See in Glossary
    particles, the Y and Z axes were inverted. This has now been fixed.
  • When using non-uniform Transform scale on mesh particles, rotation was applied after scaling. This was a regression in 2017.x. It behaved correctly in 5.6 and earlier, but was broken in the 2017 cycle. Fixing this bug corrects content created in 5.6 and earlier, but changes content created in 2017.x.
  • Spherical wind zonesA GameObject that adds the effect of wind to your terrain. For instance, Trees within a wind zone will bend in a realistic animated fashion and the wind itself will move in pulses to create natural patterns of movement among the tree. More info
    See in Glossary
    had the opposite effect on particles compared to trees. This has been corrected so the spherical wind zones now repel particles instead of attracting them. You can restore the previous behavior by negating the External Forces Multiplier, or the Wind Zone strength. Unity can’t change this automatically as Scenes with trees or directional wind zones could be incorrectly affected.

C# compiler upgrade to Roslyn

Before 2018.3, the Unity Editor used the mono C# compiler (mcs) when compiling C# files in a project. From 2018.3 onwards, the Roslyn C# compiler (csc) is used for projects targeting the new scripting runtime (.NET 4.x Equivalent). Different behavior may be noticed from the switch to Roslyn:

  • C# 7.3 is the supported
  • Additional warnings may be reported
  • Response files for the Roslyn compiler should be named csc.rsp. See PlatformDependentCompilation.

The UnityScript and Boo scripts compiler has been removed

UnityScript (.js) and Boo (.boo) script files can no longer be compiled in the Editor.

For more information see this blog post from August 2017 and you can use the unityscript2csharp tool to convert UnityScript to C#.

Did you find this page useful? Please give it a rating:

Using the Automatic API Updater
Upgrading to Unity 2018.2