Collider for 2D physics representing shapes defined by the corresponding Tilemap.
See Also: BoxCollider2D, CircleCollider2D, EdgeCollider2D, PolygonCollider2D.
extrusionFactor | The amount of Collider shapes each Tile extrudes to facilitate compositing with neighboring Tiles. This eliminates fine gaps between Tiles when using a CompositeCollider2D. This is calculated in Unity units within world space. |
hasTilemapChanges | Returns true if there are Tilemap changes that require processing for Collider updates. Returns false otherwise. |
maximumTileChangeCount | Maximum number of Tile Changes accumulated before doing a full collider rebuild instead of an incremental rebuild. |
useDelaunayMesh | When the value is true, the Collider uses an additional Delaunay triangulation step to produce the Collider mesh. When the value is false, this additional step does not occur. |
ProcessTilemapChanges | Processes Tilemap changes for Collider updates immediately, if there are any. |
enabled | Enabled Behaviours are Updated, disabled Behaviours are not. |
isActiveAndEnabled | Reports whether a GameObject and its associated Behaviour is active and enabled. |
attachedRigidbody | The Rigidbody2D attached to the Collider2D. |
bounciness | Get the bounciness used by the collider. |
bounds | The world space bounding area of the collider. |
callbackLayers | The Layers that this Collider2D will report collision or trigger callbacks for during a contact with another Collider2D. |
composite | Get the CompositeCollider2D that is available to be attached to the collider. |
contactCaptureLayers | The layers of other Collider2D involved in contacts with this Collider2D that will be captured. |
density | The density of the collider used to calculate its mass (when auto mass is enabled). |
errorState | The error state that indicates the state of the physics shapes the 2D Collider tried to create. (Read Only) |
excludeLayers | The additional Layers that this Collider2D should exclude when deciding if a contact with another Collider2D should happen or not. |
forceReceiveLayers | The Layers that this Collider2D can receive forces from during a Collision contact with another Collider2D. |
forceSendLayers | The Layers that this Collider2D is allowed to send forces to during a Collision contact with another Collider2D. |
friction | Get the friction used by the collider. |
includeLayers | The additional Layers that this Collider2D should include when deciding if a contact with another Collider2D should happen or not. |
isTrigger | Is this collider configured as a trigger? |
layerOverridePriority | A decision priority assigned to this Collider2D used when there is a conflicting decision on whether a contact between itself and another Collision2D should happen or not. |
offset | The local offset of the collider geometry. |
shapeCount | The number of active PhysicsShape2D the Collider2D is currently using. |
sharedMaterial | The PhysicsMaterial2D that is applied to this collider. |
usedByComposite | Sets whether the Collider will be used or not used by a CompositeCollider2D. |
usedByEffector | Whether the collider is used by an attached effector or not. |
gameObject | The game object this component is attached to. A component is always attached to a game object. |
tag | The tag of this game object. |
transform | The Transform attached to this GameObject. |
hideFlags | Should the object be hidden, saved with the Scene or modifiable by the user? |
name | The name of the object. |
Cast | Casts the Collider shape into the Scene starting at the Collider position ignoring the Collider itself. |
ClosestPoint | Returns a point on the perimeter of this Collider that is closest to the specified position. |
CreateMesh | Creates a planar Mesh that is identical to the area defined by the Collider2D geometry. |
Distance | Calculates the minimum separation of this collider against another collider. |
GetContacts | Retrieves all contact points for this Collider. |
GetShapeHash | Generates a simple hash value based upon the geometry of the Collider2D. |
GetShapes | Gets all the PhysicsShape2D used by the Collider2D. |
IsTouching | Check whether this collider is touching the collider or not. |
IsTouchingLayers | Checks whether this collider is touching any colliders on the specified layerMask or not. |
OverlapCollider | Get a list of all colliders that overlap this collider. |
OverlapPoint | Check if a collider overlaps a point in space. |
Raycast | Casts a ray into the Scene that starts at the Collider position and ignores the Collider itself. |
BroadcastMessage | Calls the method named methodName on every MonoBehaviour in this game object or any of its children. |
CompareTag | Checks the GameObject's tag against the defined tag. |
GetComponent | Gets a reference to a component of type T on the same GameObject as the component specified. |
GetComponentInChildren | Gets a reference to a component of type T on the same GameObject as the component specified, or any child of the GameObject. |
GetComponentInParent | Gets a reference to a component of type T on the same GameObject as the component specified, or any parent of the GameObject. |
GetComponents | Gets references to all components of type T on the same GameObject as the component specified. |
GetComponentsInChildren | Gets references to all components of type T on the same GameObject as the component specified, and any child of the GameObject. |
GetComponentsInParent | Gets references to all components of type T on the same GameObject as the component specified, and any parent of the GameObject. |
SendMessage | Calls the method named methodName on every MonoBehaviour in this game object. |
SendMessageUpwards | Calls the method named methodName on every MonoBehaviour in this game object and on every ancestor of the behaviour. |
TryGetComponent | Gets the component of the specified type, if it exists. |
GetInstanceID | Gets the instance ID of the object. |
ToString | Returns the name of the object. |
Destroy | Removes a GameObject, component or asset. |
DestroyImmediate | Destroys the object obj immediately. You are strongly recommended to use Destroy instead. |
DontDestroyOnLoad | Do not destroy the target Object when loading a new Scene. |
FindAnyObjectByType | Retrieves any active loaded object of Type type. |
FindFirstObjectByType | Retrieves the first active loaded object of Type type. |
FindObjectOfType | Returns the first active loaded object of Type type. |
FindObjectsByType | Retrieves a list of all loaded objects of Type type. |
FindObjectsOfType | Gets a list of all loaded objects of Type type. |
Instantiate | Clones the object original and returns the clone. |
bool | Does the object exist? |
operator != | Compares if two objects refer to a different object. |
operator == | Compares two object references to see if they refer to the same object. |
OnCollisionEnter2D | Sent when an incoming collider makes contact with this object's collider (2D physics only). |
OnCollisionExit2D | Sent when a collider on another object stops touching this object's collider (2D physics only). |
OnCollisionStay2D | Sent each frame where a collider on another object is touching this object's collider (2D physics only). |
OnTriggerEnter2D | Sent when another object enters a trigger collider attached to this object (2D physics only). |
OnTriggerExit2D | Sent when another object leaves a trigger collider attached to this object (2D physics only). |
OnTriggerStay2D | Sent each frame where another object is within a trigger collider attached to this object (2D physics only). |
Did you find this page useful? Please give it a rating:
Thanks for rating this page!
What kind of problem would you like to report?
Thanks for letting us know! This page has been marked for review based on your feedback.
If you have time, you can provide more information to help us fix the problem faster.
Provide more information
You've told us this page needs code samples. If you'd like to help us further, you could provide a code sample, or tell us about what kind of code sample you'd like to see:
You've told us there are code samples on this page which don't work. If you know how to fix it, or have something better we could use instead, please let us know:
You've told us there is information missing from this page. Please tell us more about what's missing:
You've told us there is incorrect information on this page. If you know what we should change to make it correct, please tell us:
You've told us this page has unclear or confusing information. Please tell us more about what you found unclear or confusing, or let us know how we could make it clearer:
You've told us there is a spelling or grammar error on this page. Please tell us what's wrong:
You've told us this page has a problem. Please tell us more about what's wrong:
Thank you for helping to make the Unity documentation better!
Your feedback has been submitted as a ticket for our documentation team to review.
We are not able to reply to every ticket submitted.