Version: 2017.2
Emission module
Limit Velocity Over Lifetime module

Particle System Shape Module

This module defines the shape (the volume or surface) from which particles can be emitted, and the direction of the start velocity. The Shape property defines the shape of the emission volume, and the rest of the module’s properties vary depending on the Shape you choose.

All shapes (except Mesh) have properties that define their dimensions, such as the Radius property. To edit these, drag the handles on the wireframe emitter shape in the Scene view. The choice of shape affects the region from which particles can be launched, but also the initial direction of the particles. For example, a Sphere emits particles outward in all directions, a Cone emits a diverging stream of particles, and a Mesh emits particles in directions that are normal to the surface.

The section below details the properties for each Shape.

Shapes in the Shape module

Sphere, Hemisphere

Note: Sphere and Hemisphere have the same properties.

Property Function
Shape The shape of the emission volume.
Sphere (esfera) Uniform emission in all directions.
Hemisphere Uniform emission in all directions on one side of a plane.
Radius The radius of the circular aspect of the shape.
Radius Thickness A value of 0 will emit from the outer surface of the shape. A value of 1 will use the entire volume. Values in between will use a proportion of the volume.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Cone

Property Function
Shape The shape of the emission volume.
Cone Emission from the base or body of a cone. The particles diverge in proportion to their distance from the cone’s center line.
Angle The angle of the cone at its point. An angle of 0 produces a cylinder while an angle of 90 gives a flat disc.
Radius The radius of the circular aspect of the shape.
Radius Thickness A value of 0 will emit from the outer surface of the shape. A value of 1 will use the entire volume. Values in between will use a proportion of the volume.
Arc The angular portion of a full circle that forms the emitter’s shape.
Mode Define how particles are generated around the arc of the shape. When set to Random, Unity generates particles randomly around the arc. If using Loop, particles are generated sequentially around the arc of the shape, and loops back to the start at the end of each cycle. Ping-Pong is the same as Loop, except each consecutive loop happens in the opposite direction to the last. Finally, Burst Spread mode distributes particle generation evenly around the shape. This can be used to give you an even spread of particles, compared to the default randomized behavior, where particles may clump together unevenly. Burst Spread is best used with burst emissions.
Spread Control the discrete intervals around the arc where particles may be generated. For example, a value of 0 will allow particles to spawn anywhere around the arc, and a value of 0.1 will only spawn particles at 10% intervals around the shape.
Speed Set a value for the speed the emission position moves around the arc. Using the small black drop-down next to the value field, set this to Constant for the value to always remain the same, or Curve for the value to change over time.
Length The length of the cone. This only applies when the Emit from: property is set to Volume.
Emit from: Selects the part of the cone to emit from: Base or Volume.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Box

Property Function
Shape The shape of the emission volume.
Box Emission from the edge, surface, or body of a box shape. The particles move in the emitter object’s forward (Z) direction.
Emit from: Select the part of the box to emit from: Edge, Shell, or Volume.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Mesh, MeshRenderer, SkinnedMeshRenderer

Mesh, MeshRenderer and SkinnedMeshRenderer have the same properties.

Property Function
Shape The shape of the emission volume.
Meshes Emission from any arbitrary Mesh shape supplied via the Inspector.
MeshRenderer Emission from a reference to a GameObject’s Mesh Renderer.
SkinnedMeshRenderer Emission from a reference to a GameObject’s Skinned Mesh Renderer.
Emission drop-down Use this drop-down to select where particles are emitted from. Select Vertex for the particles to emit from the vertices, Edge for the particles to emit from the edges, or Triangle for the particles to emit from the triangles. This is set to Vertex by default.
Mesh The Mesh that provides the emitter’s shape.
Single Material Should the particles be emitted from a particular sub-Mesh (identified by the material index number). If enabled, a numeric field is shown allowing you to specify the material index number.
Use Mesh Colors Use, or disregard, Mesh colors.
Normal Offset Distance away from the surface of the Mesh to emit particles (in the direction of the surface normal)
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Mesh details

It is possible to choose to emit only from a particular material (sub-Mesh) by using the Single Material checkbox, and to offset the emission position along the Mesh’s normals, by using the Normal Offset property. This option allows users to offset particles from the surface of a Mesh.

It is also possible to ignore the color of the Mesh, with the Use Mesh Colors checkbox.

Circle

Property Function
Shape The shape of the emission volume.
Circle (círculo) Uniform emission from the center or edge of a circle. The particles move only in the plane of the circle.
Radius The radius of the circular aspect of the shape.
Radius Thickness A value of 0 will emit from the outer edge of the circle. A value of 1 will use the entire area. Values in between will use a proportion of the area.
Arc The angular portion of a full circle that forms the emitter’s shape.
Mode Define how particles are generated around the arc of the shape. When set to Random, Unity generates particles randomly around the arc. If using Loop, particles are generated sequentially around the arc of the shape, and loops back to the start at the end of each cycle. Ping-Pong is the same as Loop, except each consecutive loop happens in the opposite direction to the last. Finally, Burst Spread mode distributes particle generation evenly around the shape. This can be used to give you an even spread of particles, compared to the default randomized behavior, where particles may clump together unevenly. Burst Spread is best used with burst emissions.
Spread Control the discrete intervals around the arc where particles may be generated. For example, a value of 0 will allow particles to spawn anywhere around the arc, and a value of 0.1 will only spawn particles at 10% intervals around the shape.
Speed Set a value for the speed the emission position moves around the arc. Using the small black drop-down next to the value field, set this to Constant for the value to always remain the same, or Curve for the value to change over time.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Edge

Property Function
Shape The shape of the emission volume.
Edge Emission from a line segment. The particles move in the emitter object’s upward (Y) direction.
Radius The radius property is used to define the length of the edge.
Mode Define how particles are generated along the radius of the shape. When set to Random, Unity generates particles randomly along the radius. If using Loop, particles are generated sequentially along the radius of the shape, and loops back to the start at the end of each cycle. Ping-Pong is the same as Loop, except each consecutive loop happens in the opposite direction to the last. Finally, Burst Spread mode distributes particle generation evenly along the radius. This can be used to give you an even spread of particles, compared to the default randomized behavior, where particles may clump together unevenly. Burst Spread is best used with burst emissions.
Spread Control the discrete intervals along the radius where particles may be generated. For example, a value of 0 will allow particles to spawn anywhere along the radius, and a value of 0.1 will only spawn particles at 10% intervals along the radius.
Speed Set a value for the speed the emission position moves along the radius. Using the small black drop-down next to the value field, set this to Constant for the value to always remain the same, or Curve for the value to change over time.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align to Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomize Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.

Donut

Property Función
Shape The shape of the emission volume.
Donut Emission from a Torus. The particles move outwards from the ring of the Torus.
Radius The radius of the main donut ring.
Donus Radius The thickness of the outer donut ring.
Radius Thickness A value of 0 will emit from the outer edge of the circle. A value of 1 will use the entire area. Values in between will use a proportion of the area.
Arc The angular portion of a full circle that forms the emitter’s shape.
Mode Define how particles are generated around the arc of the shape. When set to Random, Unity generates particles randomly around the arc. If using Loop, particles are generated sequentially around the arc of the shape, and loops back to the start at the end of each cycle. Ping-Pong is the same as Loop, except each consecutive loop happens in the opposite direction to the last. Finally, Burst Spread mode distributes particle generation evenly around the shape. This can be used to give you an even spread of particles, compared to the default randomized behavior, where particles may clump together unevenly. Burst Spread is best used with burst emissions.
Spread Control the discrete intervals around the arc where particles may be generated. For example, a value of 0 will allow particles to spawn anywhere around the arc, and a value of 0.1 will only spawn particles at 10% intervals around the shape.
Speed Set a value for the speed the emission position moves around the arc. Using the small black drop-down next to the value field, set this to Constant for the value to always remain the same, or Curve for the value to change over time.
Position Apply an offset to the emitter shape used for spawning particles.
Rotation Rotate the emitter shape used for spawning particles.
Scale Change the size of the emitter shape used for spawning particles.
Align To Direction Use this checkbox to orient particles based on their initial direction of travel. This can be useful if you want to simulate, for example, chunks of car paint flying off a car’s bodywork during a collision. If the orientation is not satisfactory, you can also override it by applying a Start Rotation value in the Main module.
Randomize Direction Use a value 0–1, to blend particle directions towards a random direction. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction is completely random.
Spherize Direction Use a value 0–1, to blend particle directions towards a spherical direction, where they travel outwards from the center of their Transform. When this is set to 0, this setting has no effect. When it is set to 1, the particle direction points outwards from the center (behaving identically to when the Shape is set to Sphere).
Randomise Position Move particles by a random amount, up to the specified value. When this is set to 0, this setting has no effect. Any other value will apply some randomness to the spawning positions of the particles.




  • 2017–05–30 Page amended with no editorial review

  • Functionality of Shape Module updated in Unity 2017.1 NewIn20171

Emission module
Limit Velocity Over Lifetime module