Version: 2021.1
The Scene view
Picking and selecting GameObjects

Scene view navigation

The Scene view has a set of navigation controls to help you move around quickly and efficiently:

Scene Gizmo

The Scene Gizmo appears in the upper-right corner of the Scene view. This displays the Scene view Camera’s current orientation, and allows you to quickly modify the viewing angle and projection mode.

The Scene Gizmo has a conical arm on each side of the cube. The arms at the forefront are labelled X, Y and Z. Click on any of the conical axis arms to snap the Scene view Camera to the axis it represents (for example: top view, left view and front view). You can also right-click the cube to bring up a menu with a list of viewing angles. To return to the default viewing angle, right-click the Scene Gizmo and click Free.

You can also toggle Perspective on and off. This changes the projection mode of the Scene view between Perspective and Orthographic (sometimes called “isometric”). To do this, click the cube in the centre of the Scene Gizmo, or the text below it. The Orthographic view has no perspective, and is useful in combination with clicking one of the conical axis arms to get a front, top or side elevation.

A Scene shown in Perspective mode (left) and Orthographic mode (right)
A Scene shown in Perspective mode (left) and Orthographic mode (right)
The same Scene viewed in top and front view, in orthographic mode
The same Scene viewed in top and front view, in orthographic mode

(Scene above from BITGEM)

If your Scene view is in an awkward viewpoint (upside-down, or just an angle you find confusing), Shift-click the cube at the centre of the Scene Gizmo to get back to a Perspective view with an angle that is looking at the Scene from the side and slightly from above.

Click on the padlock on the top right of the Scene Gizmo to enable or disable rotation of the Scene. Once Scene rotation is disabled, right-clicking the mouse pans the view instead of rotating it. This is the same as the Hand tool.

Note that in 2D Mode the Scene Gizmo does not appear, because the only option is to have the view looking perpendicularly at the XY plane.

Mac trackpad gestures

On a Mac with a trackpad, you can drag with two fingers to zoom the view.

You can also use three fingers to simulate the effect of clicking the arms of the Scene Gizmo: drag up, left, right or down to snap the Scene view Camera to the corresponding direction.

Moving, orbiting and zooming in the Scene view

Moving, orbiting and zooming are key operations in Scene view navigation. Unity provides several ways to perform them for maximum accessibility:

Arrow movement

Для перемещения по сцене можно использовать клавиши со стрелками. Клавиши вверх и вниз перемещают камеру вперед и назад в том направлении, в которое она смотрит. Клавиши влево и вправо поворачивают камеру в стороны. При использовании стрелок, зажмите клавишу Shift для ускоренного перемещения.

The Hand tool

Когда выбран инструмент Hand (быстрая шлавиша: Q), доступны следующие элементы управления мышью:

Control: Description:
Move (Перемещение) In Hand tool mode, the Move icon appears

Click and drag to move the Camera around.
Orbit When you hold down the Alt button in Hand tool mode, the Orbit icon appears

Hold Alt (Windows) or Option (macOS), and left-click and drag to orbit the Camera around the current pivot point.

This option is not available in 2D mode, because the view is orthographic.
Масштабирование

Hold Alt (Windows) or Option (macOS), and right-click and drag to zoom the Scene view.

On macOS, you can also hold Control, and left-click and drag instead.

Можно зажать клавишу Shift, чтобы увеличить скорость перемещения и масштабирования.

Flythrough mode

Use the Flythrough mode to navigate the Scene view by flying around in first-person, similar to how you would navigate in many games:

  • Щелкните и удерживайте правую кнопку мыши.
  • Теперь вы можете двигать вид используя мышь, и использовать клавиши WASD для перемещения влево/вправо вперед/назад, и клавиши Q и E для перемещения вверх и вниз.
  • Удержание Shift ускорит перемещение.

Режим полета разработан для Режима Перспективы. In Изометрическом режиме, удерживая ПКМ и двигая мышь, вы можете совершать движение камеры по орбите.

Note that Flythrough mode is not available in 2D mode. Instead, holding the right mouse button down while moving the mouse pans around the Scene view.

Camera speed

To change the current speed of the Camera in the Scene view, click the Camera icon in the toolbar. In Flythrough mode you can change the Camera speed while moving around the Scene. To do this, use the mouse scroll wheel or drag two fingers on a trackpad.

For more information, see the Camera settings documentation.

Movement shortcuts

For extra efficiency, all of these controls can also be used regardless of which transform tool is selected. The most convenient controls depend on which mouse or track-pad you are using:

Action 3-button mouse 2-button mouse or track-pad Mac with only one mouse button or track-pad
Move (Перемещение) Hold Alt+middle mouse button, then drag Hold Alt+Control+left-click, then drag Hold Alt+Command+left-click, then drag
\* Недоступно в режиме 2D. Hold Alt+left-click, then drag Hold Alt+left-click, then drag Hold Alt+left-click, then drag
Масштабирование Use the scroll wheel, or hold Alt+right-click, then drag Hold Alt+right-click, then drag Use the two-finger swipe method to scroll in and out, or hold Alt+Control+left-click, then drag
Change speed (only available in Flythrough mode) Use the scroll wheel while moving. Drag with two fingers while moving. Drag with two fingers while moving.

Centering the view on a GameObject

To center the Scene view on a GameObject, select the GameObject in the Hierarchy, then move the mouse over the Scene view and press F. If the GameObject is already selected, F zooms in to the pivot point. This feature can also be found in the menu bar under Edit > Frame Selected.

To lock the view to the GameObject even when the GameObject is moving, press Shift+F. This feature can also be found in the menu bar under Edit > Lock View to Selected.

The Scene view
Picking and selecting GameObjects