Version: 2020.2
Stable scripting runtime: known limitations
Referencing additional class library assemblies

Understanding Automatic Memory Management

When an object, string or array is created, the memory required to store it is allocated from a central pool called the heap. When the item is no longer in use, the memory it once occupied can be reclaimed and used for something else. In the past, it was typically up to the programmer to allocate and release these blocks of heap memory explicitly with the appropriate function calls. Nowadays, runtime systems like Unity’s Mono engine manage memory for you automatically. Automatic memory management requires less coding effort than explicit allocation/release and greatly reduces the potential for memory leakage (the situation where memory is allocated but never subsequently released).

Value and Reference Types

When a function is called, the values of its parameters are copied to an area of memory reserved for that specific call. Data types that occupy only a few bytes can be copied very quickly and easily. However, it is common for objects, strings and arrays to be much larger and it would be very inefficient if these types of data were copied on a regular basis. Fortunately, this is not necessary; the actual storage space for a large item is allocated from the heap and a small “pointer” value is used to remember its location. From then on, only the pointer need be copied during parameter passing. As long as the runtime system can locate the item identified by the pointer, a single copy of the data can be used as often as necessary.

Types that are stored directly and copied during parameter passing are called value types. These include integers, floats, booleans and Unity’s struct types (eg, Color and Vector3). Types that are allocated on the heap and then accessed via a pointer are called reference types, since the value stored in the variable merely “refers” to the real data. Examples of reference types include objects, strings and arrays.

Allocation and Garbage Collection

The memory manager keeps track of areas in the heap that it knows to be unused. When a new block of memory is requested (say when an object is instantiated), the manager chooses an unused area from which to allocate the block and then removes the allocated memory from the known unused space. Subsequent requests are handled the same way until there is no free area large enough to allocate the required block size. It is highly unlikely at this point that all the memory allocated from the heap is still in use. A reference item on the heap can only be accessed as long as there are still reference variables that can locate it. If all references to a memory block are gone (ie, the reference variables have been reassigned or they are local variables that are now out of scope) then the memory it occupies can safely be reallocated.

To determine which heap blocks are no longer in use, the memory manager searches through all currently active reference variables and marks the blocks they refer to as “live”. At the end of the search, any space between the live blocks is considered empty by the memory manager and can be used for subsequent allocations. For obvious reasons, the process of locating and freeing up unused memory is known as garbage collection (or GC for short).

Unity uses the Boehm–Demers–Weiser garbage collector, a stop-the-world garbage collector. Whenever Unity needs to perform garbage collection, it stops running your program code and only resumes normal execution when the garbage collector has finished all its work. This interruption can cause delays in the execution of your game that last anywhere from less than one millisecond to hundreds of milliseconds, depending on how much memory the garbage collector needs to process and on the platform the game is running on. For real-time applications like games, this can become quite a big issue, because you can’t sustain the consistent frame rate that smooth animation require when the garbage collector suspends a game’s execution. These interruptions are also known as GC spikes, because they show as spikes in the Profiler frame time graph. In the next sections you can learn more about how to write your code to avoid unnecessary garbage-collected memory allocations while running the game, so the garbage collector has less work to do.

Optimization

Garbage collection is automatic and invisible to the programmer but the collection process actually requires significant CPU time behind the scenes. When used correctly, automatic memory management will generally equal or beat manual allocation for overall performance. However, it is important for the programmer to avoid mistakes that will trigger the collector more often than necessary and introduce pauses in execution.

There are some infamous algorithms that can be GC nightmares even though they seem innocent at first sight. Repeated string concatenation is a classic example:

//C# script example
using UnityEngine;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    void ConcatExample(int[] intArray) {
        string line = intArray[0].ToString();
        
        for (i = 1; i < intArray.Length; i++) {
            line += ", " + intArray[i].ToString();
        }
        
        return line;
    }
}

The key detail here is that the new pieces don’t get added to the string in place, one by one. What actually happens is that each time around the loop, the previous contents of the line variable become dead - a whole new string is allocated to contain the original piece plus the new part at the end. Since the string gets longer with increasing values of i, the amount of heap space being consumed also increases and so it is easy to use up hundreds of bytes of free heap space each time this function is called. If you need to concatenate many strings together then a much better option is the Mono library’s System.Text.StringBuilder class.

However, even repeated concatenation won’t cause too much trouble unless it is called frequently, and in Unity that usually implies the frame update. Something like:

//C# script example
using UnityEngine;
using UnityEngine.UI;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    public Text scoreBoard;
    public int score;
    
    void Update() {
        string scoreText = "Score: " + score.ToString();
        scoreBoard.text = scoreText;
    }
}

…will allocate new strings each time Update is called and generate a constant trickle of new garbage. Most of that can be saved by updating the text only when the score changes:

//C# script example
using UnityEngine;
using UnityEngine.UI;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    public Text scoreBoard;
    public string scoreText;
    public int score;
    public int oldScore;
    
    void Update() {
        if (score != oldScore) {
            scoreText = "Score: " + score.ToString();
            scoreBoard.text = scoreText;
            oldScore = score;
        }
    }
}

Another potential problem occurs when a function returns an array value:

//C# script example
using UnityEngine;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    float[] RandomList(int numElements) {
        var result = new float[numElements];
        
        for (int i = 0; i < numElements; i++) {
            result[i] = Random.value;
        }
        
        return result;
    }
}

This type of function is very elegant and convenient when creating a new array filled with values. However, if it is called repeatedly then fresh memory will be allocated each time. Since arrays can be very large, the free heap space could get used up rapidly, resulting in frequent garbage collections. One way to avoid this problem is to make use of the fact that an array is a reference type. An array passed into a function as a parameter can be modified within that function and the results will remain after the function returns. A function like the one above can often be replaced with something like:

//C# script example
using UnityEngine;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    void RandomList(float[] arrayToFill) {
        for (int i = 0; i < arrayToFill.Length; i++) {
            arrayToFill[i] = Random.value;
        }
    }
}

This simply replaces the existing contents of the array with new values. Although this requires the initial allocation of the array to be done in the calling code (which looks slightly inelegant), the function will not generate any new garbage when it is called.

Disabling garbage collection

If you are using the Mono or IL2CPPA Unity-developed scripting back-end which you can use as an alternative to Mono when building projects for some platforms. More info
See in Glossary
scripting backendA framework that powers scripting in Unity. Unity supports three different scripting backends depending on target platform: Mono, .NET and IL2CPP. Universal Windows Platform, however, supports only two: .NET and IL2CPP. More info
See in Glossary
, you can avoid CPU spikes during garbage collection by disabling garbage collection at run time. When you disable garbage collection, memory usage never decreases because the garbage collector does not collect objects that no longer have any references. In fact, memory usage can only ever increase when you disable garbage collection. To avoid increased memory usage over time, take care when managing memory. Ideally, allocate all memory before you disable the garbage collector and avoid additional allocations while it is disabled.

For more details on how to enable and disable garbage collection at run time, see the GarbageCollector Scripting API page.

You can also try an Incremental garbage collection option.

Requesting a Collection

As mentioned above, it is best to avoid allocations as far as possible. However, given that they can’t be completely eliminated, there are two main strategies you can use to minimise their intrusion into gameplay.

Small heap with fast and frequent garbage collection

This strategy is often best for games that have long periods of gameplay where a smooth framerate is the main concern. A game like this will typically allocate small blocks frequently but these blocks will be in use only briefly. The typical heap size when using this strategy on iOSApple’s mobile operating system. More info
See in Glossary
is about 200KB and garbage collection will take about 5ms on an iPhone 3G. If the heap increases to 1MB, the collection will take about 7ms. It can therefore be advantageous sometimes to request a garbage collection at a regular frame interval. This will generally make collections happen more often than strictly necessary but they will be processed quickly and with minimal effect on gameplay:

if (Time.frameCount % 30 == 0)
{
   System.GC.Collect();
}

However, you should use this technique with caution and check the profiler statistics to make sure that it is really reducing collection time for your game.

Large heap with slow but infrequent garbage collection

This strategy works best for games where allocations (and therefore collections) are relatively infrequent and can be handled during pauses in gameplay. It is useful for the heap to be as large as possible without being so large as to get your app killed by the OS due to low system memory. However, the Mono runtime avoids expanding the heap automatically if at all possible. You can expand the heap manually by preallocating some placeholder space during startup (ie, you instantiate a “useless” object that is allocated purely for its effect on the memory manager):

//C# script example
using UnityEngine;
using System.Collections;

public class ExampleScript : MonoBehaviour {
    void Start() {
        var tmp = new System.Object[1024];
        
        // make allocations in smaller blocks to avoid them to be treated in a special way, which is designed for large blocks
        for (int i = 0; i < 1024; i++)
            tmp[i] = new byte[1024];
        
        // release reference
        tmp = null;
    }
}

A sufficiently large heap should not get completely filled up between those pauses in gameplay that would accommodate a collection. When such a pause occurs, you can request a collection explicitly:

System.GC.Collect();

Again, you should take care when using this strategy and pay attention to the profiler statistics rather than just assuming it is having the desired effect.

Reusable Object Pools

There are many cases where you can avoid generating garbage simply by reducing the number of objects that get created and destroyed. There are certain types of objects in games, such as projectiles, which may be encountered over and over again even though only a small number will ever be in play at once. In cases like this, it is often possible to reuse objects rather than destroy old ones and replace them with new ones.

Incremental Garbage Collection

Incremental garbage collection spreads out the process of garbage collection over multiple frames.

Incremental garbage collection is the default garbage collection method Unity uses. This is still the Boehm-Demers-Weiser garbage collector, but Unity runs it in an incremental mode. Instead of doing a full garbage collection each time it runs, Unity splits up the garbage collection workload over multiple frames. This means that instead of one long interruption to your program’s execution to allow the garbage collector to do its work, Unity makes multiple, much shorter interruptions. While this does not make garbage collection faster overall, distributing the workload over multiple frames can significantly reduce the problem of garbage collection “spikes” that break the smoothness of your application.

The following screenshots from the Unity Profiler illustrate how incremental collection reduces framerate hiccups. In these profile traces, the light blue parts of the frame show how much time is used by script operations, the yellow parts show the time remaining in the frame until Vsync (waiting for the next frame to begin), and the dark green parts show the time spent for garbage collection.

The following screenshot displays a frame capture from the Unity Profiler in an application that does not use incremental garbage collection:

Profile without using incremental garbage collection
Profile without using incremental garbage collection

Without incremental garbage collection, a spike interrupts the otherwise smooth 60fps frame rate. This spike pushes the frame in which garbage collection occurs well over the 16 millisecond limit required to maintain 60FPS (this example drops more than one frame because of garbage collection.)

The following screenshot displays a frame capture from the Unity Profiler in an application that does use incremental garbage collection:

Incremental garbage collection profile
Incremental garbage collection profile

With incremental garbage collection enabled (above), the same project keeps its consistent 60fps frame rate, as the garbage collection operation is broken up over several frames, using only a small time slice of each frame (the darker green fringe just above the yellow Vsync trace).

The following screenshot displays a frame capture in the Unity Profiler from the same project, also running with incremental garbage collection enabled, but this time with fewer scripting operations per frame.

Incremental garbage collection using left over time in frame
Incremental garbage collection using left over time in frame

Again, the garbage collection operation is broken up over several frames. The difference is that this time, the garbage collection uses more time each frame, and requires fewer total frames to finish. This is because Unity adjusts the time it allocates to garbage collection based on the remaining available frame time if your application uses VsyncVertical synchronization (VSync) is a display setting that caps a game’s frame rate to match the refresh rate of a monitor, to prevent image tearing. More info
See in Glossary
or Application.targetFrameRate. This way, Unity can run the garbage collection in time it would otherwise spend waiting, and therefore carry out garbage collection with a minimal performance impact.

All platforms other than WebGLA JavaScript API that renders 2D and 3D graphics in a web browser. The Unity WebGL build option allows Unity to publish content as JavaScript programs which use HTML5 technologies and the WebGL rendering API to run Unity content in a web browser. More info
See in Glossary
support incremental garbage collection.

Player Settings to disable incremental garbage collection
Player Settings to disable incremental garbage collection

In addition, if you set the VSync Count to anything other than Don’t Sync (in your project’s Quality settings or with the Application.VSync property) or you enable the Application.targetFrameRate property, Unity automatically uses any idle time left at the end of a given frame for incremental garbage collection.

To exercise more precise control over incremental garbage collection behavior, you can use the Scripting.GarbageCollector class. For example, if you do not want to use VSync or a target frame rate, you can calculate the amount of time available before the end of a frame yourself, and provide that time to the garbage collector to use.

Possible problems with incremental collection

In most cases, incremental garbage collection can mitigate the problem of garbage collection spikes. However, in some cases, incremental garbage collection may not prove beneficial in practice.

When incremental garbage collection breaks up its work, it breaks up the marking phase in which it scans all managed objects to determine which objects are still in use and which objects can be cleaned up. Dividing up the marking phase works well when most of the references between objects don’t change between slices of work. When an object reference does change, those objects must be scanned again in the next iteration. Thus, too many changes can overwhelm the incremental garbage collector and cause a situation where the marking pass never finishes because it always has more work to do – in this case, the garbage collection falls back to doing a full, non-incremental collection.

Also, when using incremental garbage collection, Unity needs to generate additional code (known as write barriers) to inform the garbage collection whenever a reference has changed (so the garbage collection will know if it needs to rescan an object). This adds some overhead when changing references which can have a measurable performance impact in some managed code.

Still, most typical Unity projects (if there is such a thing as a “typical” Unity project) can benefit from incremental garbage collection, especially if they suffer from garbage collection spikes.

Always use the ProfilerA window that helps you to optimize your game. It shows how much time is spent in the various areas of your game. For example, it can report the percentage of time spent rendering, animating or in your game logic. More info
See in Glossary
to verify that your game or program performs as you expect.

Further Information

Memory management is a subtle and complex subject to which a great deal of academic effort has been devoted. If you are interested in learning more about it then memorymanagement.org is an excellent resource, listing many publications and online articles. Further information about object pooling can be found on the Wikipedia page and also at Sourcemaking.com.


  • 2020–06–02
  • Ability to disable garbage collection on Mono and IL2CPP scripting backends added in Unity 2018.3 NewIn20183
  • Added exerimental Incremental Garbage Collection feature added in Unity 2019.1 NewIn20191
  • Added support for Incremental Garbage Collection on additional platforms: PS4, XBox One, Nintendo Switch, and the Unity Editor. 2019.2 NewIn20192
Stable scripting runtime: known limitations
Referencing additional class library assemblies