Las Render Texturas son texturas que se pueden renderizar.
They can be used to implement image based rendering effects, dynamic shadows,
projectors, reflections or surveillance cameras.
One typical usage of render textures is setting them as the "target texture" property
of a Camera (Camera.targetTexture), this will make a camera render into a texture
instead of rendering to the screen.
Keep in mind that render texture contents can become "lost" on certain events, like loading a new level, system going to a screensaver mode, in and out of fullscreen and so on.
When that happens, your existing render textures will become "not yet created" again,
you can check for that with IsCreated function.
As with other "native engine object" types, it is important to pay attention to the lifetime of
any render textures and release them when you are finished using them with the Release function,
as they will not be garbage collected like normal managed types.
See Also: Camera.targetTexture.
| active | Render texture actualmente activa. |
| antiAliasing | El nivel antialiasing para la RenderTexture. |
| autoGenerateMips | Mipmap levels are generated automatically when this flag is set. |
| bindTextureMS | If true and antiAliasing is greater than 1, the render texture will not be resolved by default. Use this if the render texture needs to be bound as a multisampled texture in a shader. |
| colorBuffer | Buffer de color de la render texture (Lectura solamente). |
| depth | The precision of the render texture's depth buffer in bits (0, 16, 24/32 are supported). |
| depthBuffer | Depth/stencil buffer de la render texture (lectura solamente). |
| descriptor | This struct contains all the information required to create a RenderTexture. It can be copied, cached, and reused to easily create RenderTextures that all share the same properties. |
| dimension | Dimensionalidad (tipo) de la render texture. |
| enableRandomWrite | Habilita la escritura de acceso aleatoria a esta render texture en Shader Model 5.0 level shaders. |
| graphicsFormat | El formato de color de la render texture. |
| height | La altura de la render texture en pixeles. |
| memorylessMode | The render texture memoryless mode property. |
| sRGB | Does this render texture use sRGB read/write conversions? (Read Only). |
| stencilFormat | The format of the stencil data that is encapsulated in the render texture.Specifying this property will create a stencil element for the render texture and set its format. This allows for stencil data to be bound as a texture to all shader types for the platforms that support it. This property does not specify the format of the stencil buffer, which is constrained by the depth buffer format specified in RenderTexture.depth.At the moment, most platforms only support R8_UInt (DirectX11, DirectX12), while PS4 also supports R8_UNorm. |
| useDynamicScale | Is the render texture marked to be scaled by the Dynamic Resolution system. |
| useMipMap | Render texture has mipmaps when this flag is set. |
| volumeDepth | Volume extent of a 3D render texture or number of slices of array texture. |
| vrUsage | If this RenderTexture is a VR eye texture used in stereoscopic rendering, this property decides what special rendering occurs, if any. |
| width | El ancho de la render texture en pixeles. |
| RenderTexture | Crea un nuevo objeto RenderTexture. |
| ConvertToEquirect | Converts the render texture to equirectangular format (both stereoscopic or monoscopic equirect). The left eye will occupy the top half and the right eye will occupy the bottom. The monoscopic version will occupy the whole texture. Texture dimension must be of type TextureDimension.Cube. |
| Create | En realidad crea la RenderTexture. |
| DiscardContents | Hint the GPU driver that the contents of the RenderTexture will not be used. |
| GenerateMips | Generate mipmap levels of a render texture. |
| GetNativeDepthBufferPtr | Recupera un apuntador (API gráfica subyacente) nativo al recurso del depth buffer. |
| IsCreated | Es la render texture en realidad creada? |
| MarkRestoreExpected | Indica que hay una operación de restauración RenderTexture esperada. |
| Release | Suelta la RenderTexture. |
| ResolveAntiAliasedSurface | Force an antialiased render texture to be resolved. |
| SetGlobalShaderProperty | Asigna esta RenderTexture como una propiedad global shader llamada propertyName. |
| GetTemporary | Asigna una render texture temporal. |
| ReleaseTemporary | Soltar una textura temporal asignada con GetTemporary. |
| SupportsStencil | Esta RenderTexture tiene un stencil buffer? |
| allowThreadedTextureCreation | Allow texture creation to occur on any thread (rather than the dedicated render thread). |
| currentTextureMemory | The amount of memory currently being used by textures. |
| desiredTextureMemory | This amount of texture memory would be used before the texture streaming budget is applied. |
| GenerateAllMips | Can be used with texture constructors that take a mip count to indicate that all mips should be generated. The value of this field is -1. |
| nonStreamingTextureCount | Number of non-streaming textures. |
| nonStreamingTextureMemory | Total amount of memory being used by non-streaming textures. |
| streamingMipmapUploadCount | How many times has a texture been uploaded due to texture mipmap streaming. |
| streamingRendererCount | Number of renderers registered with the texture streaming system. |
| streamingTextureCount | Number of streaming textures. |
| streamingTextureDiscardUnusedMips | Force the streaming texture system to discard all unused mipmaps immediately, rather than caching them until the texture memory budget is exceeded. |
| streamingTextureForceLoadAll | Force streaming textures to load all mipmap levels. |
| streamingTextureLoadingCount | Number of streaming textures with mipmaps currently loading. |
| streamingTexturePendingLoadCount | Number of streaming textures with outstanding mipmaps to be loaded. |
| targetTextureMemory | The amount of memory used by textures after the mipmap streaming and budget are applied and loading is complete. |
| totalTextureMemory | The total amount of memory that would be used by all textures at mipmap level 0. |
| hideFlags | Should the object be hidden, saved with the Scene or modifiable by the user? |
| name | El nombre del objeto. |
| anisoLevel | Nivel de filtrado anisotrópico de la textura. |
| dimension | Dimensionalidad (tipo) de la textura (lectura solamente). |
| filterMode | Modo de filtrado de la textura. |
| graphicsFormat | Returns the GraphicsFormat format or color format of a texture object. |
| height | Altura de la textura en pixels. (Read Only) |
| imageContentsHash | The hash value of the Texture. |
| isReadable | Returns true if the Read/Write Enabled checkbox was checked when the texture was imported; otherwise returns false. For a dynamic Texture created from script, always returns true. For additional information, see TextureImporter.isReadable. |
| mipMapBias | Mip map bias de la textura. |
| mipmapCount | Cuántos niveles de mipmap hay en esta textura (Lectura solamente)? |
| updateCount | This counter is incremented when the texture is updated. |
| width | Anchura de la textura en píxeles. (Read Only) |
| wrapMode | Texture coordinate wrapping mode. |
| wrapModeU | Texture U coordinate wrapping mode. |
| wrapModeV | Texture V coordinate wrapping mode. |
| wrapModeW | Texture W coordinate wrapping mode for Texture3D. |
| GetInstanceID | Devuelve el id de la instancia del objeto. |
| ToString | Returns the name of the object. |
| GetNativeTexturePtr | Recupere un puntero nativo (API de gráficos subyacente) al recurso de textura. |
| IncrementUpdateCount | Increment the update counter. |
| Destroy | Removes a GameObject, component or asset. |
| DestroyImmediate | Destroys the object obj immediately. You are strongly recommended to use Destroy instead. |
| DontDestroyOnLoad | Do not destroy the target Object when loading a new Scene. |
| FindObjectOfType | Devuelve el primer objeto activo cargado de tipo type. |
| FindObjectsOfType | Devuelve una lista de todos los objetos activos cargados de tipo type. |
| Instantiate | Clona el objeto original y devuelve el clon. |
| SetGlobalAnisotropicFilteringLimits | Establece límites anisotrópicos. |
| SetStreamingTextureMaterialDebugProperties | Uploads additional debug information to materials using textures set to stream mip maps. |
| bool | ¿Existe el objeto? |
| operator != | Compare si dos objetos se refieren a un objeto diferente. |
| operator == | Compara dos referencias de objeto para ver si se refieren al mismo objeto. |