Input devices act as the container for control hierarchies. Every hierarchy has to have a device at the root. Devices cannot occur as children of other controls.

Devices are usually created automatically in response to hardware being discovered by the Unity runtime. However, it is possible to manually add devices using methods such as AddDevice<TDevice>(string).

// Add a "synthetic" gamepad that isn't actually backed by hardware.
var gamepad = InputSystem.AddDevice<Gamepad>();

There are subclasses representing the most common types of devices, like Mouse, Keyboard, Gamepad, and Touchscreen.

To create your own types of devices, you can derive from InputDevice and register your device as a new "layout".

// InputControlLayoutAttribute attribute is only necessary if you want
// to override default behavior that occurs when registering your device
// as a layout.
// The most common use of InputControlLayoutAttribute is to direct the system
// to a custom "state struct" through the `stateType` property. See below for details.
[InputControlLayout(displayName = "My Device", stateType = typeof(MyDeviceState))]
#if UNITY_EDITOR
[InitializeOnLoad]
#endif
public class MyDevice : InputDevice
{
    public ButtonControl button { get; private set; }
    public AxisControl axis { get; private set; }
// Register the device.
static MyDevice()
{
    // In case you want instance of your device to automatically be created
    // when specific hardware is detected by the Unity runtime, you have to
    // add one or more "device matchers" (InputDeviceMatcher) for the layout.
    // These matchers are compared to an InputDeviceDescription received from
    // the Unity runtime when a device is connected. You can add them either
    // using InputSystem.RegisterLayoutMatcher() or by directly specifying a
    // matcher when registering the layout.
    InputSystem.RegisterLayout<MyDevice>(
        // For the sake of demonstration, let's assume your device is a HID
        // and you want to match by PID and VID.
        matches: new InputDeviceMatcher()
            .WithInterface("HID")
            .WithCapability("PID", 1234)
            .WithCapability("VID", 5678));
}

// This is only to trigger the static class constructor to automatically run
// in the player.
[RuntimeInitializeOnLoadMethod(RuntimeInitializeLoadType.BeforeSceneLoad)]
private static void InitializeInPlayer() {}

protected override void FinishSetup()
{
    base.FinishSetup();
    button = GetChildControl<ButtonControl>("button");
    axis = GetChildControl<AxisControl>("axis");
}

}
// A "state struct" describes the memory format used by a device. Each device can
// receive and store memory in its custom format. InputControls are then connected
// the individual pieces of memory and read out values from them.
[StructLayout(LayoutKind.Explicit, Size = 32)]
public struct MyDeviceState : IInputStateTypeInfo
{
// In the case of a HID (which we assume for the sake of this demonstration),
// the format will be "HID". In practice, the format will depend on how your
// particular device is connected and fed into the input system.
// The format is a simple FourCC code that "tags" state memory blocks for the
// device to give a base level of safety checks on memory operations.
public FourCC format => return new FourCC('H', 'I', 'D');
// InputControlAttributes on fields tell the input system to create controls
// for the public fields found in the struct.

// Assume a 16bit field of buttons. Create one button that is tied to
// bit #3 (zero-based). Note that buttons do not need to be stored as bits.
// They can also be stored as floats or shorts, for example.
[InputControl(name = "button", layout = "Button", bit = 3)]
public ushort buttons;

// Create a floating-point axis. The name, if not supplied, is taken from
// the field.
[InputControl(layout = "Axis")]
public short axis;

}

Devices can have usages like any other control (usages). Unlike other controls, however, usages of InputDevices are allowed to be changed on the fly without requiring a change to the device layout (see SetDeviceUsage(InputDevice, string)).

For a more complete example of how to implement custom input devices, check out the "Custom Device" sample which you can install from the Unity package manager.

And, as always, you can also find more information in the manual.

Constructors

InputDevice()

This constructor is public for the sake of Activator.CreateInstance only. To construct devices, use methods such as AddDevice<TDevice>(string). Manually using new on InputDevice will not result in a usable device.

Declaration

public InputDevice()

Fields

InvalidDeviceId

Value of an invalid deviceId.

Declaration

public const int InvalidDeviceId = 0

Field Value

Type	Description
int

Remarks

The input system will not assigned this ID to any device.

Properties

added

Whether the device has been added to the system.

Declaration

public bool added { get; }

Property Value

Type	Description
bool	If true, the device is currently among the devices in devices.

Remarks

Devices may be removed at any time. Either when their hardware is unplugged or when they are manually removed through RemoveDevice(InputDevice) or by being excluded through supportedDevices. When a device is removed, its instance, however, will not disappear. This property can be used to check whether the device is part of the current set of active devices.

allControls

A flattened list of controls that make up the device.

Declaration

public ReadOnlyArray<InputControl> allControls { get; }

Property Value

Type	Description
ReadOnlyArray<InputControl>

Remarks

Does not allocate.

canRunInBackground

If true, the device is capable of delivering input while the application is running in the background, i.e. while Application.isFocused is false.

Declaration

public bool canRunInBackground { get; }

Property Value

Type	Description
bool	Whether the device can generate input while in the background.

Remarks

The value of this property is determined by three separator factors.

For one, native devices have an inherent value for this property that can be retrieved through QueryCanRunInBackground. This determines whether at the input collection level, the device is capable of producing input independent of application. This is rare and only a select set of hardware, platform, and SDK/API combinations support this. The prominent class of input devices that in general do support this behavior are VR devices.

Furthermore, the property may be force-set through a device's layout by means of canRunInBackground.

Lastly, in the editor, the value of the property may be overridden depending on editorInputBehaviorInPlayMode in case certain devices are automatically kept running in play mode even when no Game View has focus.

Be aware that as far as players are concerned, only certain platforms support running Unity while not having focus. On mobile platforms, for example, this is generally not supported. In this case, the value of this property has no impact on input while the application does not have focus. See backgroundBehavior for more details.

description

Metadata describing the device (product name etc.).

Declaration

public InputDeviceDescription description { get; }

Property Value

Type	Description
InputDeviceDescription

Remarks

The description of a device is unchanging over its lifetime and does not comprise data about a device's configuration (which is considered mutable).

In most cases, the description for a device is supplied by the Unity runtime. This it the case for all native input devices. However, it is also possible to inject new devices in the form of device descriptions into the system using AddDevice(InputDeviceDescription).

The description of a device is what is matched by an InputDeviceMatcher to find the layout to use for a device.

deviceId

Unique numeric ID for the device.

Declaration

public int deviceId { get; }

Property Value

Type	Description
int

Remarks

This is only assigned once a device has been added to the system. No two devices will receive the same ID and no device will receive an ID that another device used before even if the device was removed. The only exception to this is if a device gets re-created as part of a layout change. For example, if a new layout is registered that replaces the Mouse layout, all Mouse devices will get recreated but will keep their existing device IDs.

IDs are assigned by the input runtime.

enabled

Whether the device is currently enabled (that is, sends and receives events).

Declaration

public bool enabled { get; }

Property Value

Type	Description
bool

Remarks

A device that is disabled will not receive events. I.e. events that are being sent to the device will be ignored.

When disabling a native device, a disable command will also be sent to the runtime. It depends on the specific runtime whether the device command is supported but if it is, the device will be disabled in the runtime and no longer send events. This is especially important for devices such as sensors that incur both computation and battery consumption overhead while enabled.

Specific types of devices can choose to start out in disabled state by default. This is generally the case for sensors to ensure that their overhead is only incurred when actually being used by the application.

lastUpdateTime

Timestamp of last state event used to update the device.

Declaration

public double lastUpdateTime { get; }

Property Value

Type	Description
double

Remarks

Events other than StateEvent and DeltaStateEvent will not cause lastUpdateTime to be changed. The "timeline" is reset to 0 when entering play mode. If there are any events incoming or device updates which occur prior to entering play mode, these will appear negative.

native

Whether the device comes from the runtime

Declaration

public bool native { get; }

Property Value

Type	Description
bool	Whether the device has been discovered by the Unity runtime.

Remarks

Devices can be discovered when reported by the runtime or they can be added manually through the various AddDevice APIs. Devices reported by the runtime will return true for this property whereas devices added manually will return false.

Devices reported by the runtime will usually come from the Unity engine itself.

remote

Whether the device is mirrored from a remote input system and not actually present as a "real" device in the local system.

Declaration

public bool remote { get; }

Property Value

Type	Description
bool	Whether the device mirrors a device from a remotely connected input system.

updateBeforeRender

Whether the device requires an extra update before rendering.

Declaration

public bool updateBeforeRender { get; }

Property Value

Type	Description
bool

Remarks

The value of this property is determined by updateBeforeRender in the device's control layout.

The extra update is necessary for tracking devices that are used in rendering code. For example, the eye transforms of an HMD should be refreshed right before rendering as refreshing only in the beginning of the frame will lead to a noticeable lag.

valueSizeInBytes

Size in bytes of values that the control returns.

Declaration

public override int valueSizeInBytes { get; }

Property Value

Type	Description
int

Overrides

InputControl.valueSizeInBytes

Declaration

public override Type valueType { get; }

Property Value

Type	Description
Type	Type of values produced by the control.

Overrides

InputControl.valueType

Remarks

This is the type of values that are returned when reading the current value of a control or when reading a value of a control from an event.

wasUpdatedThisFrame

Declaration

public bool wasUpdatedThisFrame { get; }

Property Value

Type	Description
bool

Methods

CompareValue(void, void)

Compare the value of the control as read from firstStatePtr to that read from secondStatePtr and return true if they are equal.

Declaration

public override bool CompareValue(void* firstStatePtr, void* secondStatePtr)

Parameters

Type	Name	Description
void*	firstStatePtr	Memory containing the control's stateBlock.
void*	secondStatePtr	Memory containing the control's stateBlock

Returns

Type	Description
bool	True if the value of the control is equal in both `firstStatePtr` and `secondStatePtr`.

Overrides

InputControl.CompareValue(void*, void*)

Remarks

Unlike CompareValue(void*, void*), this method will have to do more than just compare the memory for the control in the two state buffers. It will have to read out state for the control and run the full processing machinery for the control to turn the state into a final, processed value. CompareValue is thus more costly than CompareValue(void*, void*).

This method will apply epsilons (Epsilon) when comparing floats.

ExecuteCommand(InputDeviceCommand*)

Declaration

protected virtual long ExecuteCommand(InputDeviceCommand* commandPtr)

Parameters

Type	Name	Description
InputDeviceCommand*	commandPtr

Returns

Type	Description
long

ExecuteCommand<TCommand>(ref TCommand)

Perform a device-specific command.

Declaration

public long ExecuteCommand<TCommand>(ref TCommand command) where TCommand : struct, IInputDeviceCommandInfo

Parameters

Type	Name	Description
TCommand	command	Data for the command to be performed.

Returns

Type	Description
long	A transfer-specific return code. Negative values are considered failure codes.

Type Parameters

Name	Description
TCommand

Remarks

Commands allow devices to set up custom protocols without having to extend the device API. This is most useful for devices implemented in the native Unity runtime which, through the command interface, may provide custom, device-specific functions.

This is a low-level API. It works in a similar way to DeviceIoControl on Windows and ioctl on UNIX-like systems.

MakeCurrent()

Make this the current device of its type.

Declaration

public virtual void MakeCurrent()

Remarks

This method is called automatically by the input system when a device is added or when input is received on it. Many types of devices have .current getters that allow querying the last used device of a specific type directly (for example, see current).

There is one special case, however, related to noise. A device that has noisy controls (i.e. controls for which noisy is true) may receive input events that contain no meaningful user interaction but are simply just noise from the device. A good example of this is the PS4 gamepad which has a built-in gyro and may thus constantly feed events into the input system even if not being actually in use. If, for example, an Xbox gamepad and PS4 gamepad are both connected to a PC and the user is playing with the Xbox gamepad, the PS4 gamepad would still constantly make itself current by simply flooding the system with events. Hence why by default, noise on .current getters will be filtered out and a device will only see MakeCurrent getting called if their input was detected on non-noisy controls.

OnAdded()

Called by the system when the device is added to devices.

Declaration

protected virtual void OnAdded()

Remarks

This is called after the device has already been added.

OnConfigurationChanged()

Called by the system when the device configuration is changed. This happens when the backend sends a DeviceConfigurationEvent for the device.

Declaration

protected virtual void OnConfigurationChanged()

Remarks

This method can be used to flush out cached information. An example of where this happens is KeyControl caching information about the display name of a control. As this depends on the current keyboard layout, the information has to be fetched dynamically (this happens using QueryKeyNameCommand). Whenever the keyboard layout changes, the system sends a DeviceConfigurationEvent for the Keyboard at which point the device flushes all cached key names.

OnRemoved()

Called by the system when the device is removed from devices.

Declaration

protected virtual void OnRemoved()

Remarks

This is called after the device has already been removed.

ReadValueFromBufferAsObject(void*, int)

Declaration

public override object ReadValueFromBufferAsObject(void* buffer, int bufferSize)

Parameters

Type	Name	Description
void*	buffer
int	bufferSize

Returns

Type	Description
object

Overrides

InputControl.ReadValueFromBufferAsObject(void*, int)

ReadValueFromStateAsObject(void*)

Read the control's final, processed value from the given state and return the value as an object.

Declaration

public override object ReadValueFromStateAsObject(void* statePtr)

Parameters

Type	Name	Description
void*	statePtr

Returns

Type	Description
object	The control's value as stored in `statePtr`.

Overrides

InputControl.ReadValueFromStateAsObject(void*)

Remarks

This method allocates GC memory and should not be used during normal gameplay operation.

Exceptions

Type	Condition
ArgumentNullException	`statePtr` is null.

ReadValueFromStateIntoBuffer(void, void, int)

Read the control's final, processed value from the given state and store it in the given buffer.

Declaration

public override void ReadValueFromStateIntoBuffer(void* statePtr, void* bufferPtr, int bufferSize)

Parameters

Type	Name	Description
void*	statePtr	State to read the value for the control from.
void*	bufferPtr	Buffer to store the value in.
int	bufferSize	Size of `bufferPtr` in bytes. Must be at least valueSizeInBytes. If it is smaller, ArgumentException will be thrown.