Legacy Documentation: Version 4.6.2
Language: English
Text Asset
Texture Components

Font

Suggest a change

Success!

Thank you for helping us improve the quality of Unity Documentation. Although we cannot accept all submissions, we do read each suggested change from our users and will make updates where applicable.

Close

Sumbission failed

For some reason your suggested change could not be submitted. Please try again in a few minutes. And thank you for taking the time to help us improve the quality of Unity Documentation.

Close

Cancel

Switch to Scripting

Fonts can be created or imported for use in either the GUI Text or the Text Mesh Components.

Importing Font files

To add a font to your project you need to place the font file in your Assets folder. Unity will then automatically import it. Supported Font formats are TrueType Fonts (.ttf files) and OpenType Fonts (.otf files).

To change the Size of the font, highlight it in the Project View and you have a number of options in the Import Settings in the Inspector.

Import Settings for a font
Import Settings for a font
Property: Function:
Font Size The size of the font, based on the sizes set in any word processor
Rendering mode The font rendering mode, which tells Unity how to apply smoothing to the glyphs.
Character The character set of the font to import into the font texture
Setting this mode to Dynamic causes Unity to embed the font data itself and render font glyphs at runtime (see below).

Import Settings specific to dynamic fonts

Property: Function:
Include Font Data This setting controls the packaging of the font when used with Dynamic font property. When selected the TTF is included in the output of the build. When not selected it is assumed that the end user will have the font already installed on their machine. Note that fonts are subject to copyright and you should only include fonts that you have licensed or created for yourself.
Font Names A list of fallback fonts to use when fonts or characters are not available (see below).

After you import the font, you can expand the font in Project View to see that it has auto-generated some assets. Two assets are created during import: “font material” and “font texture”.

Dynamic fonts

When you set the Characters drop-down in the Import Settings to Dynamic, Unity will not pre-generate a texture with all font characters. Instead, it will use the FreeType font rendering engine to create the texture on the fly. This has the advantage that it can save in download size and texture memory, especially when you are using a font which is commonly included in user systems, so you don’t have to include the font data, or when you need to support asian languages or large font sizes (which would make the font textures very large using normal font textures).

When Unity tries to render text with a dynamic font, but it cannot find the font (because Include Font Data was not selected, and the font is not installed on the user machine), or the font does not include the requested glyph (like when trying to render text in east Asian scripts using a latin font), then it will try each of the fonts listed in the Font Names field, to see if it can find a font matching the font name in the project (with font data included) or installed on the user machine which has the requested glyph. If non of the listed fallback fonts are present and have the requested glpyh, Unity will fall back to a hard-coded global list of fallback fonts, which contains various international fonts commonly installed on the current runtime platform.

Note that some target platforms (WebGL, some consoles) do not have OS default fonts Unity can access for rendering text. For those platforms, Include Font Data will be ignored, and font data will always be included. All fonts to be used as fallbacks must be included in the project, so if you need to render international text, you need to supply a font which has the required characters, and set up that font in the Font Names list of other fonts.

Custom fonts

To create a custom font select ‘Create->custom font’ from the project window. This will add a custom font asset to your project library.

The Ascii Start Offset field is a decimal that defines the Ascii index you would like to begin your Character Rects index from. For example, if your Ascii Start Offset is set to 0 then the capital letter A will be at index 65 but if the Ascii Start Offset is set to 65 then the letter A will be at index 0. You can consult the Ascii Table here but you should bear in mind that custom font uses the decimal ascii numbering system.

Kerning can be set to define how close each character will be to the next character on the same line and Line spacing can be set to define how close each line will be to the next.

To create a font material you will need to import your font as a texture then apply that texture to a material, then drag your font material onto the Default Material section.

The Character Rects section is where each character of your font is defined.

The Size field is for defining how many characters are in your font.

Within each Element there is an index field for the ascii index of the character. This will be an integer that represents the character in this element.

To work out the UV values you need to figure out how your characters are positioned on a scale of 0 to 1. You divide 1 by the number of characters on a dimension. For example if you have a font and the image dimensions on it are 256x128; 4 characters across, 2 down (so 64x64) then UV width will be 0.25 and UV height will be 0.5.

For UV X and Y, it’s just a matter of deciding which character you want and multiplying the width or height value times the column/row of the letter.

Vert size is based on the pixel size of the characters e.g. your characters are each 128x128, putting 128 and –128 into the Vert Width and Height will give properly proportioned letters. Vert Y must be negative.

Width will be the width of your character in pixels.

Example of custom font inspector with values
Example of custom font inspector with values

Custom fonts

To create a custom font select ‘Create->custom font’ from the project window. This will add a custom font asset to your project library.

The Ascii Start Offset field is a decimal that defines the Ascii index you would like to begin your Character Rects index from. For example, if your Ascii Start Offset is set to 0 then the capital letter A will be at index 65 but if the Ascii Start Offset is set to 65 then the letter A will be at index 0. You can consult the Ascii Table here but you should bear in mind that custom font uses the decimal ascii numbering system.

Kerning can be set to define how close each character will be to the next character on the same line and Line spacing can be set to define how close each line will be to the next.

To create a font material you will need to import your font as a texture then apply that texture to a material, then drag your font material onto the Default Material section.

The Character Rects section is where each character of your font is defined.

The Size field is for defining how many characters are in your font.

Within each Element there is an index field for the ascii index of the character. This will be an integer that represents the character in this element.

To work out the UV values you need to figure out how your characters are positioned on a scale of 0 to 1. You divide 1 by the number of characters on a dimension. For example if you have a font and the image dimensions on it are 256x128; 4 characters across, 2 down (so 64x64) then UV width will be 0.25 and UV height will be 0.5.

For UV X and Y, it’s just a matter of deciding which character you want and multiplying the width or height value times the column/row of the letter.

Vert size is based on the pixel size of the characters e.g. your characters are each 128x128, putting 128 and –128 into the Vert Width and Height will give properly proportioned letters. Vert Y must be negative.

Width will be the width of your character in pixels.

Example of custom font inspector with values
Example of custom font inspector with values

Unicode support

Unity has full unicode support. Unicode text allows you to display German, French, Danish or Japanese characters that are usually not supported in an ASCII character set. You can also enter a lot of different special purpose characters like arrow signs or the option key sign, if your font supports it.

To use unicode characters, choose either Unicode or Dynamic from the Characters drop-down in the Import Settings. You can now display unicode characters with this font. If you are using a GUIText or Text Mesh, you can enter unicode characters into the Component’s Text field in the Inspector.

You can also use unicode characters if you want to set the displayed text from scripting. The Javascript and C# compilers fully support Unicode based scripts. You have to save your scripts with UTF–16 encoding. Now you can add unicode characters to a string in your script and they will display as expected in UnityGUI, a GUIText, or a Text Mesh.

Changing Font Color

There are different ways to change the color of your displayed font, depending on how the font is used.

GUIText & Text Mesh

If you are using a GUIText or a Text Mesh, you can change its color by using a custom Material for the font. In the Project View, click on Create->Material, and select and set up the newly created Material in the Inspector. Make sure you assign the texture from the font asset to the material. If you use the built-in GUI/Text Shader shader for the font material, you can choose the color in the Text Color property of the material.

UnityGUI

If you are using UnityGUI scripting to display your font, you have much more control over the font’s color under different circumstances. To change the font’s color, you create a GUISkin from Assets->Create->GUI Skin, and define the color for the specific control state, e.g. Label->Normal->Text Color. For more details, please read the GUI Skin page.

Hints

  • To display an imported font select the font and choose GameObject > Create Other > 3D Text.
  • Using only lower or upper case characters reduces generated texture size.
  • The default font that Unity supplies is Arial. This font is always available and does not appear in the Project window.

See also the page on Fonts.

Text Asset
Texture Components