Version: 2023.1
Language : English
Physics
Player

Physics 2D reference

The following Project settingsA broad collection of settings which allow you to configure how Physics, Audio, Networking, Graphics, Input and many other areas of your project behave. More info
See in Glossary
manage the global settings for Physics 2D, which define the limits on the accuracy of the physics simulation of 2D GameObjectsThe fundamental object in Unity scenes, which can represent characters, props, scenery, cameras, waypoints, and more. A GameObject’s functionality is defined by the Components attached to it. More info
See in Glossary
in the Unity physics system. A more accurate simulation requires more processing overhead, and these settings allow you to adjust the trade-off between accuracy and performance that best suits your project.

To open the Physics 2D project settings window, go to Edit > Project Settings… > Physics 2D to manage the global Project settings for Physics 2D

Note: To manage the global settings for 3D physics instead, refer to the Physics Project settings reference page.

Physics 2D Inspector settings
Physics 2D Inspector settings

General Settings tab

The following are the properties available in the General Settings tab of the Physics 2D manager window.

Property Function
Gravity Set the amount of gravity applied to all Rigidbody 2D GameObjects. Usually you only set gravity for the negative direction of the y-axis.
Default Material Set a reference to the Physics Material 2DUse to adjust the friction and bounce that occurs between 2D physics objects when they collide More info
See in Glossary
to use if none has been assigned to an individual ColliderAn invisible shape that is used to handle physical collisions for an object. A collider doesn’t need to be exactly the same shape as the object’s mesh - a rough approximation is often more efficient and indistinguishable in gameplay. More info
See in Glossary
2D.
Velocity Iterations Set the number of iterations made by the physics system to resolve velocity effects. Higher numbers result in more accurate physics calculations but the Editor requires more CPU time.
Position Iterations Set the number of iterations made by the physics system to resolve position changes. Higher numbers result in more accurate physics calculations but also requires more CPU time.
Bounce Threshold Set the threshold for elastic collisionsA collision occurs when the physics engine detects that the colliders of two GameObjects make contact or overlap, when at least one has a Rigidbody component and is in motion. More info
See in Glossary
. Unity treats any collisions with a relative linear velocity below this threshold as inelastic, so no bounce will occur.
Max Linear Correction Set the maximum linear position correction used when solving constraints (from a range between 0.0001 to 1000000). This helps to prevent overshooting.
Max Angular Correction Set the maximum angular correction used when solving constraints (from a range between 0.0001 to 1000000). This helps to prevent overshooting.
Max Translation Speed Set the maximum linear speed of a RigidbodyA component that allows a GameObject to be affected by simulated gravity and other forces. More info
See in Glossary
2D GameObject during any physics update.
Max Rotation Speed Set the maximum rotation speed of a Rigidbody 2D GameObject during any physics update.
Baumgarte Scale Set the scale factor that determines how fast Unity resolves collision overlaps.
Baumgarte Time of Impact Scale Set the scale factor that determines how fast Unity resolves time-of-impact overlaps.
Time to Sleep Set the time (in seconds) that must pass after a Rigidbody 2D stops moving before it goes to sleep.
Linear Sleep Tolerance Set the linear speed below which a Rigidbody 2D goes to sleep after the Time to Sleep elapses.
Angular Sleep Tolerance Set the rotational speed below which a Rigidbody 2D goes to sleep after Time to Sleep elapses.
Default Contact Offset Set a proximity distance value for Colliders to be considered in contact, even when they aren’t actually in contact. Colliders whose distance is less than the sum of their contactOffset values generate contacts, which causes the collision detectionAn automatic process performed by Unity which determines whether a moving GameObject with a Rigidbody and collider component has come into contact with any other colliders. More info
See in Glossary
system to predictively enforce the contact constraint even when the objects are slightly separated. Caution: Reducing this value too far can slow down Unity’s ability to calculate continuous polygon collisions. Conversely, increasing the value too much might create artifacts for vertex collisions.
Simulation Mode Select when Unity executes the 2D physics simulation.
Fixed Update Select this to have Unity execute the physics simulation immediately after MonoBehaviour.FixedUpdate is called.
Update Select this to have Unity execute the physics simulation immediately after MonoBehaviour.Update is called.
When you select this mode, additional properties are visible.
Script Select this to manually execute the physics simulation via Physics2D.Simulate.
Simulation Layers Select which layer(s) Unity simulates when Simulation Mode is set to FixedUpdate or Update.
The Everything option is selected by default, which automatically selects all layers and includes all of them in the physics simulation. You can select which specific layer(s) to include in the simulation, and Unity will only simulate the Rigidbody2D, jointsA physics component allowing a dynamic connection between Rigidbody components, usually allowing some degree of movement such as a hinge. More info
See in Glossary
, effectors, and contacts between Collider2D on those selected layers.
Queries Hit Triggers Enable this option if you want Collider 2Ds marked as Triggers to return a hit when any physics query (such as Linecasts or Raycasts) intersects with them. Defaults to enabled.
Queries Start In Colliders Enable this option if you want physics queries that start inside a Collider 2D to detect the Collider they start in.
Callbacks On Disable Enable this option to produce collision callbacks when a Collider with contacts is disabled.
Reuse Collision Callbacks Enable this setting to have the physics system reuse a single Collision2D instance for all collision callbacks. Disable to have the physics system create a new Collision2D instance for each collision callback instead.
Auto Sync Transforms Enable this option to automatically sync transform changes with the physics system.
GizmosA graphic overlay associated with a GameObject in a Scene, and displayed in the Scene View. Built-in scene tools such as the move tool are Gizmos, and you can create custom Gizmos using textures or scripting. Some Gizmos are only drawn when the GameObject is selected, while other Gizmos are drawn by the Editor regardless of which GameObjects are selected. More info
See in Glossary
Select the types of physics 2D gizmos to be drawn within the Editor. You may select multiple options.
Nothing Select this to deselect every option. No physics 2D gizmo will be drawn.
Everything Select this to select every option.
All Colliders Select this to have all Colliders drawn without having to select them in the Hierarchy window.
Colliders Outlined Select this to have Colliders drawn with an outline (you can customize the outline’s color in 2D Physics Preferences).
Colliders Filled Select this to have all Colliders drawn using the Fill color specified in the 2D Physics Preferences.
Colliders Sleeping Select this to have Colliders drawn to show when the Rigidbody 2D they are attached to is sleeping using the Awake or Asleep colors specified in the 2D Physics Preferences.
Collider Contacts Select this to have Collider contacts shown as a directional arrow that starts at the contact point in the direction of the contact normal. You can specify the Contact color of the arrow in the 2D Physics Preferences.
Collider Bounds Select this to have Collider bounds drawn for all PhysicsShape2D that a Collider creates. The bounds are an Axis-Aligned Bounding Box (AABB).
Multithreading Expand this to adjust the multithreading settings. Refer to Multithreading for information about each property.

Simulation Mode: Update

The followings properties are visible only when you select Update or Script for the Simulation Mode.

Property Function
Use Sub Stepping Enable this property to have the Editor use simulation sub-stepping during the simulation step.
Use Sub Step Count Enable this property to have the Editor calculate contacts for all simulation sub-steps. This provides a more exact simulation for each sub-step but will reduce performance. Disable this property to only calculate contacts for the first simulation sub-step.
Max Sub Step Count Sets the maximum number of simulation sub-steps allowed per-frame when simulation sub-stepping is enabled and actively running. This will also limit the amount of time the Editor spends on sub-stepping.
Min Sub Step FPSSee first person shooter, frames per second.
See in Glossary
Sets the minimum frames-per-second allowed for a simulation step before the Editor begins to use sub-stepping. When the current frame rate is lower than this value, the Editor will use simulation sub-stepping if Use Sub Stepping is enabled.

Multithreading

The settings in the Multithreading section allow you to use the C# Job System to configure multithreaded physics.

Multithreading settings expanded.
Multithreading settings expanded.
Property Function
Use Multithreading Enable this option to execute the simulation steps using the job system and use the rest of these options to control how to achieve that.
Use Consistency Sorting Enable this option if maintaining a consistent processing order becomes important to the simulation.
Executing simulation steps on multiple CPU threads produces separate batches of data. Processing these separate batches reduces determinism in processing order, although produces faster results.
Interpolation Poses Per Job Set the minimum number of Rigidbody 2D objects being interpolated in each simulation job.
New Contacts Per Job Set the minimum number of new contacts to find in each simulation job.
Collide Contacts Per Job Set the minimum number of contacts to collide in each simulation job.
Clear Flags Per Job Set the minimum number of flags to be cleared in each simulation job.
Clear Body Forces Per Job Set the minimum number of bodies to be cleared in each simulation job.
Sync Discrete Fixtures Per Job Set the minimum number of fixtures to synchronize in the broadphase during discrete island solving in each simulation job.
Sync Continuous Fixtures Per Job Set the minimum number of fixtures to synchronize in the broadphase during continuous island solving in each simulation job.
Find Nearest Contacts Per Job Set the minimum number of nearest contacts to find in each simulation job.
Update Trigger Contacts Per Job Set the minimum number of trigger contacts to update in each simulation job.
Island Solver Cost Threshold Set the minimum threshold cost of all bodies, contacts and joints in an island during discrete island solving.
Island Solver Body Cost Scale Set the cost scale of each body during discrete island solving.
Island Solver Contact Cost Scale Set the cost scale of each contact during discrete island solving.
Island Solver Joint Cost Scale Set the cost scale of each joint during discrete island solving.
Island Solver Bodies Per Job Set the minimum number of bodies to solve in each simulation job when performing island solving.
Island Solver Contacts Per Job Set the minimum number of contacts to solve in each simulation job when performing island solving.

Layer Collision Matrix tab

The Layer Collision Matrix tab settings control whether Colliders (attached to different Rigidbody 2Ds) can come into contact which each other, based on the Layer assigned to the GameObject they are on. The matrix displays each Layer against every other Layer, allowing you to select which specific Layers can come into contact with another.

The Layer Collision Matrix tab.
The Layer Collision Matrix tab.

A check mark at the intersection between two Layers indicates that contact is allowed between those two Layers, while a cleared checkbox indicates that contact between those two Layers is never allowed. When you hover over a Layer’s name or a checkbox, its row and column are highlighted to make it easier to see which Layers its affects.

Tip: To optimize for the best possible performance, you should ensure that only the minimum number of potential contacts are selected by only selecting the specific Layers that you want to have contact with others, and disabling all other unnecessary contacts. To help with this, you can select Disable All or Enable All to quickly select or deselect all options at once. and then select the specific Layers.

Additional resources

Physics2DManager

Physics
Player