Version: 2022.2
LanguageEnglish
  • C#

RenderTexture

class in UnityEngine

/

Inherits from:Texture

/

Implemented in:UnityEngine.CoreModule

Suggest a change

Success!

Thank you for helping us improve the quality of Unity Documentation. Although we cannot accept all submissions, we do read each suggested change from our users and will make updates where applicable.

Close

Submission failed

For some reason your suggested change could not be submitted. Please <a>try again</a> in a few minutes. And thank you for taking the time to help us improve the quality of Unity Documentation.

Close

Cancel

Switch to Manual

Description

Render textures are textures that can be rendered to.

They can be used to implement image based rendering effects, dynamic shadows, projectors, reflections or surveillance cameras.

One typical usage of render textures is setting them as the "target texture" property of a Camera (Camera.targetTexture), this will make a camera render into a texture instead of rendering to the screen.

Keep in mind that render texture contents can become "lost" on certain events, like loading a new level, system going to a screensaver mode, in and out of fullscreen and so on. When that happens, your existing render textures will become "not yet created" again, you can check for that with IsCreated function.

As with other "native engine object" types, it is important to pay attention to the lifetime of any render textures and release them when you are finished using them with the Release function, as they will not be garbage collected like normal managed types.

A render texture only has a data representation on the GPU and you need to use Texture2D.ReadPixels to transfer its contents to CPU memory.

The initial contents of a newly created render texture are undefined. On some platforms and APIs the contents will default to black, but you shouldn't depend on this. You can use LoadStoreActionDebugModeSettings to highlight undefined areas of the display, to help you debug rendering problems in your built application.

See Also: Camera.targetTexture.

Static Properties

activeCurrently active render texture.

Properties

antiAliasingThe antialiasing level for the RenderTexture.
autoGenerateMipsMipmap levels are generated automatically when this flag is set.
bindTextureMSIf true and antiAliasing is greater than 1, the render texture will not be resolved by default. Use this if the render texture needs to be bound as a multisampled texture in a shader.
colorBufferColor buffer of the render texture (Read Only).
depthThe precision of the render texture's depth buffer in bits (0, 16, 24 and 32 are supported).
depthBufferDepth/stencil buffer of the render texture (Read Only).
depthStencilFormatThe format of the depth/stencil buffer.
descriptorThis struct contains all the information required to create a RenderTexture. It can be copied, cached, and reused to easily create RenderTextures that all share the same properties.
dimensionDimensionality (type) of the render texture.
enableRandomWriteEnable random access write into this render texture on Shader Model 5.0 level shaders.
graphicsFormatThe color format of the render texture. You can set the color format to None to achieve depth-only rendering.
heightThe height of the render texture in pixels.
memorylessModeThe render texture memoryless mode property.
sRGBDoes this render texture use sRGB read/write conversions? (Read Only).
stencilFormatThe format of the stencil data that you can encapsulate within a RenderTexture.Specifying this property creates a stencil element for the RenderTexture and sets its format. This allows for stencil data to be bound as a Texture to all shader types for the platforms that support it. This property does not specify the format of the stencil buffer, which is constrained by the depth buffer format specified in RenderTexture.depth.Currently, most platforms only support R8_UInt (DirectX11, DirectX12), while PS4 also supports R8_UNorm.
useDynamicScaleIs the render texture marked to be scaled by the Dynamic Resolution system.
useMipMapRender texture has mipmaps when this flag is set.
volumeDepthVolume extent of a 3D render texture or number of slices of array texture.
vrUsageIf this RenderTexture is a VR eye texture used in stereoscopic rendering, this property decides what special rendering occurs, if any.
widthThe width of the render texture in pixels.

Constructors

RenderTextureCreates a new RenderTexture object.

Public Methods

ConvertToEquirectConverts the render texture to equirectangular format (both stereoscopic or monoscopic equirect). The left eye will occupy the top half and the right eye will occupy the bottom. The monoscopic version will occupy the whole texture. Texture dimension must be of type TextureDimension.Cube.
CreateActually creates the RenderTexture.
DiscardContentsHint the GPU driver that the contents of the RenderTexture will not be used.
GenerateMipsGenerate mipmap levels of a render texture.
GetNativeDepthBufferPtrRetrieve a native (underlying graphics API) pointer to the depth buffer resource.
IsCreatedIs the render texture actually created?
ReleaseReleases the RenderTexture.
ResolveAntiAliasedSurfaceForce an antialiased render texture to be resolved.
SetGlobalShaderPropertyAssigns this RenderTexture as a global shader property named propertyName.

Static Methods

GetTemporaryAllocate a temporary render texture.
ReleaseTemporaryRelease a temporary texture allocated with GetTemporary.
SupportsStencilDoes a RenderTexture have stencil buffer?

Inherited Members

Static Properties

allowThreadedTextureCreationAllow Unity internals to perform Texture creation on any thread (rather than the dedicated render thread).
currentTextureMemoryThe amount of memory that all Textures in the scene use.
desiredTextureMemoryThe total size of the Textures, in bytes, that Unity loads if there were no other constraints. Before Unity loads any Textures, it applies the memory budget which reduces the loaded Texture resolution if the Texture sizes exceed its value. The desiredTextureMemory value takes into account the mipmap levels that Unity has requested or that you have set manually.For example, if Unity does not load a Texture at full resolution because it is far away or its requested mipmap level is greater than 0, Unity reduces the desiredTextureMemory value to match the total memory needed.The desiredTextureMemory value can be greater than the Texture.targetTextureMemory value.
GenerateAllMipsCan be used with Texture constructors that take a mip count to indicate that all mips should be generated. The value of this field is -1.
nonStreamingTextureCountThe number of non-streaming Textures in the scene. This includes instances of Texture2D and CubeMap Textures. This does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally.
nonStreamingTextureMemoryThe amount of memory Unity allocates for non-streaming Textures in the scene. This only includes instances of Texture2D and CubeMap Textures. This does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally.
streamingMipmapUploadCountHow many times has a Texture been uploaded due to Texture mipmap streaming.
streamingRendererCountNumber of renderers registered with the Texture streaming system.
streamingTextureCountNumber of streaming Textures.
streamingTextureDiscardUnusedMipsThis property forces the streaming Texture system to discard all unused mipmaps instead of caching them until the Texture memory budget is exceeded. This is useful when you profile or write tests to keep a predictable set of Textures in memory.
streamingTextureForceLoadAllForce streaming Textures to load all mipmap levels.
streamingTextureLoadingCountNumber of streaming Textures with mipmaps currently loading.
streamingTexturePendingLoadCountNumber of streaming Textures with outstanding mipmaps to be loaded.
targetTextureMemoryThe total amount of Texture memory that Unity allocates to the Textures in the scene after it applies the memory budget and finishes loading Textures. `targetTextureMemory`also takes mipmap streaming settings into account. This value only includes instances of Texture2D and CubeMap Textures. This value does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally.
totalTextureMemoryThe total amount of Texture memory that Unity would use if it loads all Textures at mipmap level 0. This is a theoretical value that does not take into account any input from the streaming system or any other input, for example when you set the`Texture2D.requestedMipmapLevel` manually. To see a Texture memory value that takes inputs into account, use `desiredTextureMemory`. `totalTextureMemory` only includes instances of Texture2D and CubeMap Textures. This value does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally.

Properties

hideFlagsShould the object be hidden, saved with the Scene or modifiable by the user?
nameThe name of the object.
anisoLevelDefines the anisotropic filtering level of the Texture.
dimensionDimensionality (type) of the Texture (Read Only).
filterModeFiltering mode of the Texture.
graphicsFormatReturns the GraphicsFormat format or color format of a Texture object.
heightHeight of the Texture in pixels (Read Only).
imageContentsHashThe hash value of the Texture.
isDataSRGBReturns true if the texture pixel data is in sRGB color space (Read Only).
isReadableWhether Unity stores an additional copy of this texture's pixel data in CPU-addressable memory.
mipMapBiasThe mipmap bias of the Texture.
mipmapCountHow many mipmap levels are in this Texture (Read Only).
updateCountThis counter is incremented when the Texture is updated.
widthWidth of the Texture in pixels (Read Only).
wrapModeTexture coordinate wrapping mode.
wrapModeUTexture U coordinate wrapping mode.
wrapModeVTexture V coordinate wrapping mode.
wrapModeWTexture W coordinate wrapping mode for Texture3D.

Public Methods

GetInstanceIDGets the instance ID of the object.
ToStringReturns the name of the object.
GetNativeTexturePtrRetrieve a native (underlying graphics API) pointer to the Texture resource.
IncrementUpdateCountIncrement the update counter.

Static Methods

DestroyRemoves a GameObject, component or asset.
DestroyImmediateDestroys the object obj immediately. You are strongly recommended to use Destroy instead.
DontDestroyOnLoadDo not destroy the target Object when loading a new Scene.
FindAnyObjectByTypeRetrieves any active loaded object of Type type.
FindFirstObjectByTypeRetrieves the first active loaded object of Type type.
FindObjectOfTypeReturns the first active loaded object of Type type.
FindObjectsByTypeRetrieves a list of all loaded objects of Type type.
FindObjectsOfTypeGets a list of all loaded objects of Type type.
InstantiateClones the object original and returns the clone.
SetGlobalAnisotropicFilteringLimitsSets Anisotropic limits.
SetStreamingTextureMaterialDebugPropertiesThis function sets mipmap streaming debug properties on any materials that use this Texture through the mipmap streaming system.

Operators

boolDoes the object exist?
operator !=Compares if two objects refer to a different object.
operator ==Compares two object references to see if they refer to the same object.