Git dependencies
When the Package Manager fetches a package from a Git repository, it adds the package locally to your project. This allows you to test unpublished changes, but you can’t use it to contribute to that Git repository. To set up an existing local Git repository as a dependency in your project, use a path to your local Git repository instead.
Note: You can’t specify Git dependenciesThe Package Manager retrieves Git dependencies from a Git repository directly rather than from a package registry. Git dependencies use a Git URL reference instead of a version, and there’s no guarantee about the package quality, stability, validity, or even whether the version stated in its package.json file respects Semantic Versioning rules with regards to officially published releases of this package. More info
See in Glossary in a package.json file because the Package Manager doesn’t support Git dependencies between packages. It supports Git dependencies only for projects, so you can declare Git dependencies only in the project’s manifest.json file.
Tip: If you want to update your Git dependency to a specific version (revision) from the repository, see Locked Git dependencies.
This section includes the following topics:
Requirements
To use Git dependencies in a project, make sure you installed the Git client (minimum version 2.14.0) on your computer and that you have added the Git executable path to the PATH system environment variable.
Warning: Unity tested the Package Manager to work with Git 2.14.0 and above. Unity can’t guarantee the results if you use Git versions below 2.14.0.
If the repository tracks files with Git LFS, make sure the Git LFS client is also installed on your machine. If it’s not installed, the Package Manager can’t retrieve the files stored on the LFS server and instead checks out the LFS pointer files without any error or warning messages.
You can use the Package Manager window to install a package directly from a Git repository. For more information, see Installing from a Git URL.
Git URLs and extended syntax
The Package Manager supports all Git protocols, with the exception of local file paths. To specify a Git URL as a dependency, add the name of the package to add with a Git URL instead of the version number or local file path to the project manifestEach Unity project has a project manifest, which acts as an entry point for the Package Manager. This file must be available in the <project>/Packages directory. The Package Manager uses it to configure many things, including a list of dependencies for that project, as well as any package repository to query for packages. More info
See in Glossary. For example, this demonstrates how to specify a remote Git using different protocols:
{
"dependencies": {
"com.mycompany.mypackage1": "https://github.example.com/myuser/myrepository1.git",
"com.mycompany.mypackage2": "ssh://git@github.example.com/myuser/myrepository2.git",
"com.mycompany.mypackage3": "file://localhost/github.example.com/myuser/myrepository3.git",
"com.mycompany.mypackage4": "git://github.example.com/myuser/myrepository4.git",
etc.
}
}
The Package Manager recognizes that a dependency formatted as a URL is a Git URL by looking for the .git file extension at the end of the repository path. Some Git repository hosting services don’t support URLs with this extension while others enforce it. For this reason, the Git dependency syntax allows you to omit the extension if you use the GIT protocol, or if you add a special git+ prefix to the HTTP/HTTPS, SSH, or FILE URL.
Note: The git+ prefix is a special marker in the manifest.json file that indicates that the dependency is Git based. The Package Manages doesn’t pass it to Git when cloning the repository.
For more information about the format of Git-supported URLs, see the documentation for the git clone command. For an overview of the difference between the protocols that Git uses, see the Git documentation for using protocols.
You can also use extended syntax for Git dependencies:
-
If the package you want isn’t at the root of the repository, you can specify a path to a package’s subfolder in the repository. This is necessary only if the package you want isn’t at the root of the repository. For example, the string
?path=/folder1/folder2in:"https://github.example.com/myuser/myrepository.git?path=/folder1/folder2".For more information, see Specifying a package in a subfolder.
-
You can specify a Git revision, which can be a tag, branch name, or a specific commit hash to lock onto. This ensures that the Package Manager always loads that exact revision. If you don’t specify a revision, the Package Manager clones the repository at the default branch and latest commit and locks onto that revision. For example, the string
#v2.0.0in:"https://github.example.com/myuser/myrepository.git#v2.0.0"For more information, see Targeting a specific revision.
Using the HTTP/HTTPS protocol
You can use the HTTPS protocol with the full URL:
{
"dependencies": {
"com.mycompany.mypackage": "https://github.example.com/myuser/myrepository.git"
}
}
If your Git server doesn’t support the .git extension, you can add the special git+ prefix, with or without the extension:
{
"dependencies": {
"com.mycompany.mypackage1": "git+https://github.example.com/myuser/myrepository1.git",
"com.mycompany.mypackage2": "git+https://github.example.com/myuser/myrepository2"
}
}
Note: Alternatively, you can use the GIT protocol instead of the git+ prefix. For more information, see Using the GIT protocol.
If the repository is publicly accessible, HTTPS is the recommended scheme for sharing Git URLs with users because you can copy and paste the URL directly from the Git repository hosting service web page.
If the repository isn’t publicly accessible and you are using HTTPS, the repository server fails to authenticate you because you can’t interact with the server to provide your credentials. In this case, the Editor notifies you that authentication failed.
To work around these authentication issues, you can either use a Git credentials helper to authenticate beforehand, or use the SSH protocol instead. If you set up and configure an SSH key pair with the Git repository hosting service, the Package Manager can authenticate the request seamlessly on your behalf.
Using the SSH protocol
You can use the SSH protocol with the full URL:
{
"dependencies": {
"com.mycompany.mypackage": "ssh://git@mycompany.github.com/gitproject/com.mycompany.mypackage.git"
}
}
If your Git server doesn’t support the .git extension, you can add the special git+ prefix, with or without the extension:
{
"dependencies": {
"com.mycompany.mypackage1": "git+ssh://git@github.example.com/myuser/myrepository1.git",
"com.mycompany.mypackage2": "git+ssh://git@github.example.com/myuser/myrepository2"
}
}
Note: Alternatively, you can use the GIT protocol instead of the git+ prefix. For more information, see Using the GIT protocol.
You can also use the SCP-like shorthand, which the Package Manager always recognizes as a Git dependency:
{
"dependencies": {
"com.mycompany.mypackage": "git@mycompany.github.com:gitproject/com.mycompany.mypackage.git"
}
}
Using PuTTY on Windows
Git uses the keys at the default location when you use SSH to authenticate. However, if you are using PuTTY as the SSH client on Windows, you need to configure the GIT_SSH environment variable to make it point to plink.exe.
Authenticating with SSH
If you want to use the SSH protocol, you need to set up SSH keys outside of Unity. For more information on setting up authentication for a specific host, see the help pages for Bitbucket, GitLab, and GitHub.
Note: If you encrypted your SSH key with a passphrase, the Package Manager can’t retrieve the package, because it doesn’t provide a way to enter the passphrase in a terminal or command line. In this case, the Editor notifies you that authentication failed. For help with using the ssh-agent for authentication, see Solutions for SSH.
Using the FILE protocol
The Package Manager doesn’t recognize Git URLs with the file: prefix as Git dependencies unless they’re properly formatted. This means you must use either the git+file: protocol, or the .git suffix with the file: protocol:
{
"dependencies": {
"com.mycompany.mypackage1": "git+file://github.example.com/myuser/myrepository1",
"com.mycompany.mypackage2": "git+file:///github.example.com/myuser/myrepository2",
"com.mycompany.mypackage3": "file:///github.example.com/myuser/myrepository3.git"
}
}
Note: Alternatively, you can use the GIT protocol instead of the git+ prefix. For more information, see Using the GIT protocol.
The Package Manager interprets any other syntax as a local path instead.
Using the GIT protocol
The Package Manager recognizes the git: protocol, with or without the .git path suffix:
{
"dependencies": {
"com.mycompany.mypackage1": "git://github.example.com/myuser/myrepository1.git",
"com.mycompany.mypackage2": "git://github.example.com/myuser/myrepository2"
}
}
The GIT protocol doesn’t need or support the git+ prefix.
Targeting a specific revision
To declare a specific revision that you want the Package Manager to clone, add the revision prefixed by the number sign (#) at the end of the URL:
{
"dependencies": {
"com.mycompany.mypackage1": "https://github.example.com/myuser/myrepository1.git#revision",
"com.mycompany.mypackage2": "git+https://github.example.com/myuser/myrepository2#revision"
}
}
The revision can be any tag, branch or commit hash. You must provide a full commit hash. Unity doesn’t support shortened SHA–1 hashes. This table shows examples for specifying revisions:
| Syntax: | URL example |
|---|---|
| Latest default branch | "https://github.example.com/myuser/myrepository.git" |
| Specific branch | "https://github.example.com/myuser/myrepository.git#my-branch" |
| Specific version | "https://github.example.com/myuser/myrepository.git#v2.0.0" |
| Commit hash | "https://github.example.com/myuser/myrepository.git#9e72f9d5a6a3dadc38d813d8399e1b0e86781a49" |
Specifying a package in a subfolder of the repository
If you specify a repository using the Git URL syntax, the Package Manager assumes that the package must be at the root of the repository. However, some packages aren’t located at the root level of their repository, and some repositories contain more than one package.
You can use the path query parameter in the Git URL to notify the Package Manager where to find the package. The path you specify must be relative to the root of the repository, and the subfolder you specify must contain the package manifestEach package has a manifest, which provides information about the package to the Package Manager. The manifest contains information such as the name of the package, its version, a description for users, dependencies on other packages (if any), and other details. More info
See in Glossary (package.json file).
To specify a repository subfolder for a Git dependency, use the path query parameter:
{
"dependencies": {
"com.mycompany.mypackage": "https://github.example.com/myuser/myrepository.git?path=/subfolder"
}
}
In this case, the Package Manager registers the package located in the specified repository subfolder and disregards the rest of the repository.
Sometimes a repository contains several related packages. If you want to add more than one package from the same repository, you must add two separate entries to your project manifest:
{
"dependencies": {
"com.mycompany.mypackage1": "https://github.example.com/myuser/myrepository.git?path=/subfolder1",
"com.mycompany.mypackage3": "https://github.example.com/myuser/myrepository.git?path=/subfolder2/subfolder3"
}
}
Note: If you specify the same repository multiple times, the Package Manager clones the same repository multiple times, which leads to reduced performance and additional network usage.
Using paths and revisions at the same time
The path query parameter always precedes the revision anchor. The reverse order fails. This is an example of the correct order to use:
{
"dependencies": {
"com.mycompany.mypackage": "https://github.example.com/myuser/myrepository.git?path=/example/folder#v1.2.3"
}
}
Locked Git dependencies
One of the core principles of the Package Manager is determinism. If you share your project with other users, the Package Manager should install the same set of package dependencies and versions, and that includes packages that it fetches from Git. To achieve this, the Package Manager tracks commit hashes of Git dependencies by using a lock file.
When you add a Git dependency with a revision set to a branch or a tag, the Package Manager fetches the corresponding commit hash to store in the lock file. Over time, branches and tags can point to different commits on the Git repository. For example, a branch can have newer commits added to it.
To update the package to a different commit that a branch or tag points to, use the Add package from git URL button and enter a Git URL. You can use the same Git URL, because the Package Manager ignores the locked commit hash when you submit a new request. However, you can also specify a new revision number, tag, or branch as a revision instead.
Alternatively, you could create a script with the Client.Add C# API method with that Git URL.
Git LFS Support
The Package Manager supports Git dependencies with repositories using Git LFS. Since Git LFS is designed to work with minimal configuration overhead, it supports both HTTPS and SSH authentication:
- For information about HTTPS authentication, see Using the HTTP/HTTPS protocol.
- For information about SSH authentication, see Using the SSH protocol.
Retrieval of files stored on the LFS server fails if users need authentication and don’t have valid credentials with permission to access the remote repository.
Package authors can help the Git LFS client locate the LFS Server by providing it with the URL in the .lfsconfig configuration file in the repository. There are two ways to do this:
# Option 1: global setting
[lfs]
url = ssh://git@HOSTNAME/path/to/repo.git
# Option 2: per-remote setting
[remote "origin"]
lfsurl = ssh://git@HOSTNAME/path/to/repo.git
If the repository contains a .lfsconfig file, make sure you include it in the .npmignore file to avoid including it in published releases of the package.
Git LFS cache
As of Unity 2021.2, you can optionally enable a Git LFS cache for the Package Manager to use when checking out Git-based dependencies. This avoids having to download the same file every time you check out a different revision of the repository.
The Git LFS cache for the Package Manager is different from the Git LFS cache in the .git/lfs folder of your Git repository. The Package Manager can’t use the default Git cache because it doesn’t keep cloned repositories after it copies packages to the project cache.
To enable the Git LFS cache for the Package Manager, choose one of the following options:
- To enable the Git LFS cache and use the
git-lfssubfolder under the default global cache root as its location, set theUPM_ENABLE_GIT_LFS_CACHEenvironment variable to any (non-empty) value. - To enable the Git LFS cache and use a custom location for it, set the
UPM_GIT_LFS_CACHE_PATHenvironment variable to the custom path. When you set the location, the Git LFS cache option is automatically enabled.
For more information about how to set environment variables for the global cache, see Customize the global cache location.
Note: This optimization requires extra disk space when using Git LFS-enabled packages. You need to decide which is the greater benefit: Git LFS file caching costs disk space but saves you from downloading the same files again. However, some situations can’t make use of the cache and use up disk space without reusing the files. For example, your Git dependencies might resolve to revisions that reference different LFS-tracked file content, such as these scenarios:
- Using different Git revisions in dependencies in multiple projects
- Frequently updating a package to revisions that contain different changed LFS files