Version: 2022.1
Patching with AssetBundles
Unity Asset Bundle Browser tool

Troubleshooting

This section describes several problems that commonly appear in projects using AssetBundles.

Asset Duplication

Unity 5’s AssetBundle system will discover all dependencies of an Object when the Object is built into an AssetBundle. This is done using the Asset Database. This dependency information is used to determine the set of Objects that will be included in an AssetBundle.

Objects that are explicitly assigned to an AssetBundle will only be built into that AssetBundle. An Object is “explicitly assigned” when that Object’s AssetImporter has its assetBundleName property set to a non-empty string.

Any Object that is not explicitly assigned in an AssetBundle will be included in all AssetBundles that contain 1 or more Objects that reference the untagged Object.

If two different Objects are assigned to two different AssetBundles, but both have references to a common dependency Object, then that dependency Object will be copied into both AssetBundles. The duplicated dependency will also be instanced, meaning that the two copies of the dependency Object will be considered different Objects with a different identifiers. This will increase the total size of the application’s AssetBundles. This will also cause two different copies of the Object to be loaded into memory if the application loads both of its parents.

There are several ways to address this problem:

  1. Ensure that Objects built into different AssetBundles do not share dependencies. Any Objects which do share dependencies can be placed into the same AssetBundle without duplicating their dependencies.

    • This method usually is not viable for projects with many shared dependencies. It can produce monolithic AssetBundles that must be rebuilt and re-downloaded too frequently to be convenient or efficient.
  2. Segment AssetBundles so that no two AssetBundles that share a dependency will be loaded at the same time.

    • This method may work for certain types of projects, such as level-based games. However, it still unnecessarily increases the size of the project’s AssetBundles, and increases both build times and loading times.
  3. Ensure that all dependency assets are built into their own AssetBundles. This entirely eliminates the risk of duplicated assets, but also introduces complexity. The application must track dependencies between AssetBundles, and ensure that the right AssetBundles are loaded before calling any AssetBundle.LoadAsset APIs.

In Unity 5, Object dependencies are tracked via the AssetDatabase API, located in the UnityEditor namespace. As the namespace implies, this API is only available in the Unity Editor and not at runtime. AssetDatabase.GetDependencies can be used to locate all of the immediate dependencies of a specific Object or Asset. Note that these dependencies may have their own dependencies. Additionally, the AssetImporter API can be used to query the AssetBundle to which any specific Object is assigned.

By combining the AssetDatabase and AssetImporter APIs, it is possible to write an Editor script that ensures that all of an AssetBundle’s direct or indirect dependenciesAn indirect, or transitive dependency occurs when your project requests a package which itself “depends on” another package. For example, if your project depends on the alembic@1.0.7 package which in turn depends on the timeline@1.0.0 package, then your project has an direct dependency on Alembic and an indirect dependency on Timeline. More info
See in Glossary
are assigned to AssetBundles, or that no two AssetBundles share dependencies that have not been assigned to an AssetBundle. Due to the memory cost of duplicating assets, it is recommended that all projects have such a script.

Sprite Atlas Duplication

The following sections describe a quirk of Unity 5’s asset dependency calculation code when used in conjunction with automatically-generated spriteA 2D graphic objects. If you are used to working in 3D, Sprites are essentially just standard textures but there are special techniques for combining and managing sprite textures for efficiency and convenience during development. More info
See in Glossary
atlases.

Any automatically-generated sprite atlasA texture that is composed of several smaller textures. Also referred to as a texture atlas, image sprite, sprite sheet or packed texture. More info
See in Glossary
will be assigned to the AssetBundle containing the Sprite Objects from which the sprite atlas was generated. If the sprite Objects are assigned to multiple AssetBundles, then the sprite atlas will not be assigned to an AssetBundle and will be duplicated. If the Sprite Objects are not assigned to an AssetBundle, then the sprite atlas will also not be assigned to an AssetBundle.

To ensure that sprite atlases are not duplicated, check that all sprites tagged into the same sprite atlas are assigned to the same AssetBundle.

Unity 5.2.2p3 and older

Automatically-generated sprite atlases will never be assigned to an AssetBundle. Because of this, they will be included in any AssetBundles containing their constituent sprites and also any AssetBundles referencing their constituent sprites.

Because of this problem, it is strongly recommended that all Unity 5 projects using Unity’s sprite packerA facility that packs graphics from several sprite textures tightly together within a single texture known as an atlas. Unity provides a Sprite Packer utility to automate the process of generating atlases from the individual sprite textures. More info
See in Glossary
upgrade to Unity 5.2.2p4, 5.3 or any newer version of Unity.

For projects that cannot upgrade, there are two workarounds for this problem:

  1. Easy: Avoid using Unity’s built-in sprite packer. Sprite atlases generated by external tools will be normal Assets, and can be properly assigned to an AssetBundle.

  2. Hard: Assign all Objects that use automatically atlased sprites to the same AssetBundle as the sprites.

    • This will ensure that the generated sprite atlas is not seen as the indirect dependency of any other AssetBundles and will not be duplicated.

    • This solution preserves the workflow of using Unity’s sprite packer, but it degrades developers’ ability to separate Assets into different AssetBundles, and forces the re-download of an entire sprite atlas when any data changes on any component referencing the atlas, even if the atlas itself is unchanged.

Android Textures

Due to heavy device fragmentation in the Android ecosystem, it is often necessary to compress textures into several different formats. While all Android devices support ETC1, ETC1 does not support textures with alpha channels. Should an application not require OpenGL ES 2 support, the cleanest way to solve the problem is to use ETC2, which is supported by all Android OpenGL ES 3 devices.

Most applications need to ship on older devices where ETC2 support is unavailable. One way to solve this problem is with Unity 5’s AssetBundle Variants. (Please see Unity’s Android optimization guide for details on other options.)

To use AssetBundle Variants, all textures that cannot be cleanly compressed using ETC1 must be isolated into texture-only AssetBundles. Next, create sufficient variants of these AssetBundles to support the non-ETC2-capable slices of the Android ecosystem, using vendor-specific texture compressionA method of storing data that reduces the amount of storage space it requires. See Texture Compression, Animation Compression, Audio Compression, Build Compression.
See in Glossary
formats such as DXT5, PVRTC and ATITC. For each AssetBundle Variant, change the included textures’ TextureImporter settings to the compression format appropriate to the Variant.

At runtime, support for the different texture compression3D Graphics hardware requires Textures to be compressed in specialized formats which are optimized for fast Texture sampling. More info
See in Glossary
formats can be detected using the SystemInfo.SupportsTextureFormat API. This information should be used to select and load the AssetBundle Variant containing textures compressed in a supported format.

More information on Android texture compression formats can be found here.

iOS File Handle Overuse

The issue described in the following section was fixed in Unity 5.3.2p2. Current versions of Unity are not affected by this issue.

In versions prior to Unity 5.3.2p2, Unity would hold an open file handle to an AssetBundle the entire time that the AssetBundle is loaded. This is not a problem on most platforms. However, iOS limits the number of file handles a process may simultaneously have open to 255. If loading an AssetBundle causes this limit to be exceeded, the loading call will fail with a “Too Many Open File Handles” error.

This was a common problem for projects trying to divide their content across many hundreds or thousands of AssetBundles.

For projects unable to upgrade to a patched version of Unity, temporary solutions are:

  • Reducing the number of AssetBundles in use by merging related AssetBundles
  • Using AssetBundle.Unload(false) to close an AssetBundle’s file handle, and managing the loaded Objects’ lifecycles manually

Interactions between Shaders and AssetBundles

When you build an AssetBundle, Unity uses information in that bundle to select which shaderA program that runs on the GPU. More info
See in Glossary
variants to compile. This includes information about the scenesA Scene contains the environments and menus of your game. Think of each unique Scene file as a unique level. In each Scene, you place your environments, obstacles, and decorations, essentially designing and building your game in pieces. More info
See in Glossary
, materials, Graphics Settings, and ShaderVariantCollections in the AssetBundle.

Separate build pipelines compile their own shaders independently of other pipelines. If both a Player build and an Addressables build reference a shader, Unity compiles two separate copies of the shader, one for each pipeline.

This process doesn’t account for any runtime information such as keywords, textures, or changes due to code execution. If you want to include specific shaders in your build, either include a ShaderVariantCollection with the desired shaders, or include the shader in your build manually by adding it to the Always Included Shaders list in your graphics settings.


Patching with AssetBundles
Unity Asset Bundle Browser tool