Legacy Documentation: Version 2017.2 (Go to current version)
LanguageEnglish
  • C#
  • JS

Script language

Select your preferred scripting language. All code snippets will be displayed in this language.

LineUtility.Simplify

Suggest a change

Success!

Thank you for helping us improve the quality of Unity Documentation. Although we cannot accept all submissions, we do read each suggested change from our users and will make updates where applicable.

Close

Submission failed

For some reason your suggested change could not be submitted. Please <a>try again</a> in a few minutes. And thank you for taking the time to help us improve the quality of Unity Documentation.

Close

Cancel

public static method Simplify(points: List<Vector3>, tolerance: float, pointsToKeep: List<int>): void;
public static void Simplify(List<Vector3> points, float tolerance, List<int> pointsToKeep);
public static method Simplify(points: List<Vector3>, tolerance: float, simplifiedPoints: List<Vector3>): void;
public static void Simplify(List<Vector3> points, float tolerance, List<Vector3> simplifiedPoints);
public static method Simplify(points: List<Vector2>, tolerance: float, pointsToKeep: List<int>): void;
public static void Simplify(List<Vector2> points, float tolerance, List<int> pointsToKeep);
public static method Simplify(points: List<Vector2>, tolerance: float, simplifiedPoints: List<Vector2>): void;
public static void Simplify(List<Vector2> points, float tolerance, List<Vector2> simplifiedPoints);

Parameters

points The points that make up the original line.
tolerance This value is used to evaluate which points should be removed from the line. A higher value results in a simpler line (less points). A positive value close to zero results in a line with little to no reduction. A value of zero or less has no effect.
pointsToKeep Populated by this function. Contains the indexes of the points that should be generate a simplified version..
simplifiedPoints Populated by this function. Contains the points that form the simplified line.

Description

Generates a simplified version of the original line by removing points that fall within the specified tolerance.

As an example, you can use this function for reducing a complex line made up of thousands of points. The line can be reduced to hundreds or even less points and still maintain a form closely matching the original. You can generate multiple versions of the same line with varying detail levels by adjusting the tolerance (higher tolerance values results in less points in the generated line). The generated line can then be displayed using the LODGroup system.

The Simplify algorithm is based on the Ramer Douglas Peucker algorithm ; it creates a line that closely represents the provided line but with fewer points(determined by tolerance).

Note: This function can handle a large number of points as it is non-recursive. The 2D version of this function performs better than this function as it uses a simpler way to evaluate the points.

See Also: LineRenderer.Simplify.

The following example shows how to apply line simplification to an existing line.

#pragma strict
// This example shows how to apply line simplification to a line that already contains points.
@RequireComponent(LineRenderer)
public class SimpleExampleLineUtility extends MonoBehaviour {
	public var tolerance: float = 1;
	function Start() {
		// Get the points.
		var lineRenderer: var = GetComponent.<LineRenderer>();
		var pointsBefore: int = lineRenderer.positionCount;
		var points: var = new Vector3[pointsBefore];
		lineRenderer.GetPositions(points);
		// Simplify.
		var simplifiedPoints: var = new List.<Vector3>();
		LineUtility.Simplify(points.ToList(), tolerance, simplifiedPoints);
		// Assign back to the line renderer.
		lineRenderer.positionCount = simplifiedPoints.Count;
		lineRenderer.SetPositions(simplifiedPoints.ToArray());
		Debug.Log("Line reduced from " + pointsBefore + " to " + lineRenderer.positionCount);
	}
}
using System.Collections.Generic;
using System.Linq;
using UnityEngine;

// This example shows how to apply line simplification to a line that already contains points. [RequireComponent(typeof(LineRenderer))] public class SimpleExampleLineUtility : MonoBehaviour { public float tolerance = 1; void Start() { // Get the points. var lineRenderer = GetComponent<LineRenderer>(); int pointsBefore = lineRenderer.positionCount; var points = new Vector3[pointsBefore]; lineRenderer.GetPositions(points);

// Simplify. var simplifiedPoints = new List<Vector3>(); LineUtility.Simplify(points.ToList(), tolerance, simplifiedPoints);

// Assign back to the line renderer. lineRenderer.positionCount = simplifiedPoints.Count; lineRenderer.SetPositions(simplifiedPoints.ToArray());

Debug.Log("Line reduced from " + pointsBefore + " to " + lineRenderer.positionCount); } }

The following example shows how the pointsToKeep parameter can be used to return a list of indices. The list can then be used to simplify a line that retains points in that list. Additional points can still be added on to the resulting simplified line.

#pragma strict
// This example shows how to use the pointsToKeep parameter to generate a new simplified version of the line.
@RequireComponent(LineRenderer)
public class SimpleExampleLineUtilityPointsToKeep extends MonoBehaviour {
	public var tolerance: float = 1;
	function Start() {
		// Get the points.
		var lineRenderer: var = GetComponent.<LineRenderer>();
		var pointsBefore: int = lineRenderer.positionCount;
		var points: var = new Vector3[pointsBefore];
		lineRenderer.GetPositions(points);
		// Simplify.
		var pointsToKeep: var = new List.<int>();
		LineUtility.Simplify(points.ToList(), tolerance, pointsToKeep);
		var simplifiedPoints: var = new Vector3[pointsToKeep.Count];
		for (var i: int = 0; i < simplifiedPoints.Length; ++i) {
			simplifiedPoints[i] = points[pointsToKeep[i]];
		}
		// Assign back to the line renderer.
		lineRenderer.positionCount = simplifiedPoints.Length;
		lineRenderer.SetPositions(simplifiedPoints);
		Debug.Log("Line reduced from " + pointsBefore + " to " + lineRenderer.positionCount);
	}
}
using System.Collections.Generic;
using System.Linq;
using UnityEngine;

// This example shows how to use the pointsToKeep parameter to generate a new simplified version of the line. [RequireComponent(typeof(LineRenderer))] public class SimpleExampleLineUtilityPointsToKeep : MonoBehaviour { public float tolerance = 1; void Start() { // Get the points. var lineRenderer = GetComponent<LineRenderer>(); int pointsBefore = lineRenderer.positionCount; var points = new Vector3[pointsBefore]; lineRenderer.GetPositions(points);

// Simplify. var pointsToKeep = new List<int>(); LineUtility.Simplify(points.ToList(), tolerance, pointsToKeep);

var simplifiedPoints = new Vector3[pointsToKeep.Count]; for (int i = 0; i < simplifiedPoints.Length; ++i) { simplifiedPoints[i] = points[pointsToKeep[i]]; }

// Assign back to the line renderer. lineRenderer.positionCount = simplifiedPoints.Length; lineRenderer.SetPositions(simplifiedPoints);

Debug.Log("Line reduced from " + pointsBefore + " to " + lineRenderer.positionCount); } }

This example generates a line in the shape of a sine wave and provides a GUI for customizing the line generation and simplification parameters.

#pragma strict
// This example creates a sine wave and then simplifies it using the LineUtility.
// The parameters can be adjusted through an in game GUI to allow for experimentation.
@RequireComponent(LineRenderer)
public class LineUtilityExample extends MonoBehaviour {
	public var numberOfPoints: int = 1000;
	public var length: float = 50;
	public var waveHeight: float = 10;
	public var tolerance: float = 0.1f;
	private var lineRenderer: LineRenderer;
	private var points: List.<Vector3> = new List.<Vector3>();
	private var simplifiedPoints: List.<Vector3> = new List.<Vector3>();
	// Simplified points after LineOptimizer is used.
	public function Start() {
		lineRenderer = GetComponent.<LineRenderer>();
	}
	// Generates the sine wave points.
	public function GeneratePoints() {
		points.Clear();
		var halfWaveHeight: float = waveHeight * 0.5f;
		var step: float = length / numberOfPoints;
		for (var i: int = 0; i < numberOfPoints; ++i) {
			points.Add(new Vector3(i * step, Mathf.Sin(i * step) * halfWaveHeight, 0));
		}
	}
	// Simplify the line using the LineOptimizer.
	public function SimplifyLine() {
		simplifiedPoints.Clear();
		LineUtility.Simplify(points, tolerance, simplifiedPoints);
		lineRenderer.positionCount = simplifiedPoints.Count;
		lineRenderer.SetPositions(simplifiedPoints.ToArray());
	}
	// Draw a simple GUI slider with a label.
	private static function GUISlider(label: String, value: float, min: float, max: float) {
		GUILayout.BeginHorizontal(GUILayout.Width(Screen.width / 2.0f));
		GUILayout.Label(label + "(" + value + ") :", GUILayout.Width(150));
		var val: var = GUILayout.HorizontalSlider(value, min, max);
		GUILayout.EndHorizontal();
		return val;
	}
	public function OnGUI() {
		GUILayout.Label("LineUtility.Simplify", GUI.skin.box);
		// We use GUI.changed to detect if a value was changed via the GUI, if it has we can then re-generate the points and simplify the line again.
		GUI.changed = false;
		numberOfPoints = intGUISlider("Number of Points", numberOfPoints, 0, 1000);
		length = GUISlider("Length", length, 0, 100);
		waveHeight = GUISlider("Wave Height", waveHeight, 0, 100);
		if (GUI.changed)
			GeneratePoints();
		tolerance = GUISlider("Simplify Tolerance", tolerance, 0, 2);
		if (GUI.changed)
			SimplifyLine();
		var percentRemoved: float = 100.0f - (floatlineRenderer.positionCount / numberOfPoints) * 100.0f;
		if (tolerance > 0.0f)
			GUILayout.Label("Points after simplification: " + lineRenderer.positionCount + "(Removed " + percentRemoved.ToString("##.##") + "%)");
	}
}
using System.Collections.Generic;
using UnityEngine;

// This example creates a sine wave and then simplifies it using the LineUtility. // The parameters can be adjusted through an in game GUI to allow for experimentation. [RequireComponent(typeof(LineRenderer))] public class LineUtilityExample : MonoBehaviour { public int numberOfPoints = 1000; public float length = 50; public float waveHeight = 10; public float tolerance = 0.1f;

private LineRenderer lineRenderer; private List<Vector3> points = new List<Vector3>(); // Generated points before LineOptimizer is used. private List<Vector3> simplifiedPoints = new List<Vector3>(); // Simplified points after LineOptimizer is used.

public void Start() { lineRenderer = GetComponent<LineRenderer>(); }

// Generates the sine wave points. public void GeneratePoints() { points.Clear(); float halfWaveHeight = waveHeight * 0.5f; float step = length / numberOfPoints; for (int i = 0; i < numberOfPoints; ++i) { points.Add(new Vector3(i * step, Mathf.Sin(i * step) * halfWaveHeight, 0)); } }

// Simplify the line using the LineOptimizer. public void SimplifyLine() { simplifiedPoints.Clear(); LineUtility.Simplify(points, tolerance, simplifiedPoints); lineRenderer.positionCount = simplifiedPoints.Count; lineRenderer.SetPositions(simplifiedPoints.ToArray()); }

// Draw a simple GUI slider with a label. private static float GUISlider(string label, float value, float min, float max) { GUILayout.BeginHorizontal(GUILayout.Width(Screen.width / 2.0f)); GUILayout.Label(label + "(" + value + ") :", GUILayout.Width(150)); var val = GUILayout.HorizontalSlider(value, min, max); GUILayout.EndHorizontal(); return val; }

public void OnGUI() { GUILayout.Label("LineUtility.Simplify", GUI.skin.box);

// We use GUI.changed to detect if a value was changed via the GUI, if it has we can then re-generate the points and simplify the line again. GUI.changed = false;

numberOfPoints = (int)GUISlider("Number of Points", numberOfPoints, 0, 1000); length = GUISlider("Length", length, 0, 100); waveHeight = GUISlider("Wave Height", waveHeight, 0, 100); if (GUI.changed) GeneratePoints();

tolerance = GUISlider("Simplify Tolerance", tolerance, 0, 2); if (GUI.changed) SimplifyLine();

float percentRemoved = 100.0f - ((float)lineRenderer.positionCount / numberOfPoints) * 100.0f; if (tolerance > 0.0f) GUILayout.Label("Points after simplification: " + lineRenderer.positionCount + "(Removed " + percentRemoved.ToString("##.##") + "%)"); } }

Did you find this page useful? Please give it a rating: