Change log

[0.6.0] - 2020-11-26

New features

  • An error handling pass has been made and Error.StatusCode have been added to indicate more specific errors.
  • Error.DisconnectReason has been added, so when NetworkDriver.PopEvent returns a NetworkEvent.Type.Disconnect the reader returned contains 1 byte of data indicating the reason.

Changes

  • The function signature for NetworkDriver.BeginSend has changed. It now returns a int value indicating if the function succeeded or not and the DataStreamWriter now instead is returned as a out parameter.
  • The function signature for INetworkInterface.Initialize has changed. It now requires you to return a int value indicating if the function succeeded or not.
  • The function signature for INetworkInterface.CreateInterfaceEndPoint has changed. It now requires you to return a int value indicating if the function succeeded or not, and NetworkInterfaceEndPoint is now returned as a out parameter.

Fixes

  • Fixed a potential crash when receiving a malformated packet.
  • Fixed an issue where the DataStream could sometimes fail writing packet uints before the buffer was full.

Upgrade guide

  • NetworkDriver.BeginSend now returns a int indicating a Error.StatusCode, and the DataStreamWriter is passed as an out parameter.

[0.5.0] - 2020-10-01

New features

Changes

Fixes

  • Fixed display of ipv6 addresses as strings

Upgrade guide

[0.4.1] - 2020-09-10

New features

  • Added NetworkDriver.GetEventQueueSizeForConnection which allows you to check how many pending events a connection has.

Changes

Fixes

  • Fixed a compatibility isue with DOTS Runetime.

Upgrade guide

[0.4.0-preview.3] - 2020-08-21

New features

  • Added a new fragmentation pipeline which allows you to send messages larger than one MTU. If the FragmentationPipelineStage is part of the pipeline you are trying to send with the NetworkDriver will allow a requiredPayloadSize larger than one MTU to be specified and split the message into multiple packages.

Changes

  • The methods to read and write strings in the DataStreamReader/DataStreamWriter have been changed to use FixedString<N> instead of NativeString<N>. The name of the methods have also changed from ReadString to ReadFixedString64 - and similar changes for write and the packed version of the calls. The calls support FixedString32, FixedString64, FixedString128, FixedString512 and FixedString4096.
  • Minimum required unity version has changed to 2020.1.2.

Fixes

Upgrade guide

The data stream methods for reading and writing strings have changed, they now take FixedString64 instead of NativeString64 and the names have changed as follows: DataStreamReader.ReadString -> DataStreamReader.ReadFixedString64, DataStreamReader.ReadPackedStringDelta -> DataStreamReader.ReadPackedFixedString64Delta, DataStreamWriter.WriteString -> DataStreamWriter.WriteFixedString64, DataStreamWriter.WritePackedStringDelta -> DataStreamWriter.WritePackedFixedString64Delta.

The transport now requires Unity 2020.1.2.

[0.3.1-preview.4] - 2020-06-05

New features

Changes

  • Added a new requiredPayloadSize parameter to BeginSend. The required size cannot be larger than NetworkParameterConstants.MTU.
  • Added errorcode parameter to a network_set_nonblocking, network_set_send_buffer_size and network_set_receive_buffer_size in NativeBindings.
  • Additional APIs added to NativeBindings: network_set_blocking, network_get_send_buffer_size, network_get_receive_buffer_size, network_set_receive_timeout, network_set_send_timeout.
  • Implemented NetworkEndPoint.AddressAsString.

Fixes

  • Fixed an issue in the reliable pipeline which would cause it to not recover if one end did not receive packages for a while.
  • Fixed NetworkInterfaceEndPoint and NetworkEndPoint GetHashCode implementation.
  • Fixed invalid use of strings when specifying the size of socket buffers in the native bindings

Upgrade guide

[0.3.0-preview.6] - 2020-02-24

New features

Changes

  • Pipelines are now registered by calling NetworkPipelineStageCollection.RegisterPipelineStage before creating a NetworkDriver. The built-in pipelines do not require explicit registration. The interface for implementing pipelines has been changed to support this.
  • NetworkDriver is no longer a generic type. You pass it an interface when creating the NetworkDriver, which means you can switch between backends without modifying all usage of the driver. There is a new NetworkDriver.Create which creates a driver with the default NetworkInterface. It is also possible to create a new NetworkDriver by passing a NetworkInterface instance as the first argument.
  • NetworkDriver.Send is replaced by BeginSend and EndSend. This allows us to do less data copying when sending messages. The interface for implementing new network interfaces has been changed to support this.
  • DataStreamReader and DataStreamWriter no longer owns any memory. They are just reading/writing the data of a NativeArray<byte>.
  • DataStreamWriter has explicit types for all Write methods.
  • DataStreamReader.Context has been removed.
  • Error handling for DataStreamWriter has been improved, on failure it returns false and sets DataStreamWriter.HasFailedWrites to true. DataStreamReader returns a default value and sets DataStreamReader.HasFailedReads to true. DataStreamReader will throw an exception instead of returning a default value in the editor.
  • IPCManager is no longer public, it is still possible to create a NetworkDriver with a IPCNetworkInterface.
  • Added NetworkDriver.ScheduleFlushSend which must be called to guarantee that messages are send before next call to NetworkDriver.ScheduleUpdate.
  • Added NetworkDriver.LastUpdateTime to get the update time the NetworkDriver used for the most recent update.
  • Removed the IPC address family, use a IPv4 localhost address instead.

Fixes

  • Fixed a memory overflow in the reliability pipeline.
  • Made the soaker report locale independent.

Upgrade guide

Creation and type of NetworkDriver has changed, use NetworkDriver.Create or pass an instance of a NetworkInterface to the NetworkDriver constructor.

NetworkDriver.Send has been replaced by a pair of NetworkDriver.BeginSend and NetworkDriver.EndSend. Calling BeginSend will return a DataStreamWriter to which you write the data. The DataStreamWriter is then passed to EndSend.

All write calls in DataStreamWriter need an explicit type, for example Write(0) should be replaced by WriteInt(0).

DataStreamWriter no longer shares current position between copies, if you call a method which writes you must pass it by ref for the modifications to apply.

DataStreamWriter no longer returns a DeferedWriter, you need to take a copy of the writer at the point you want to make modifications and use the copy to overwrite data later.

DataStreamWriter is no longer disposable. If you use the allocating constructor you need to use Allocator.Temp, if you pass a NativeArray<byte> to the constructor the NativeArray owns the memory.

DataStreamReader.Context no longer exists, you need to pass the DataStreamReader itself by ref if you read in a different function.

The interface for network pipelines has been changed.

The interface for network interfaces has been changed.

[0.2.3-preview.0] - 2019-12-12

New features

Changes

  • Added reading and write methods for NativeString64 to DataStream.

Fixes

Upgrade guide

[0.2.2-preview.2] - 2019-12-05

New features

Changes

  • Added a stress test for parallel sending of data.
  • Upgraded collections to 0.3.0.

Fixes

  • Fixed a race condition in IPCNetworkInterface.
  • Changed NetworkEventQueue to use UnsafeList to get some type safety.
  • Fixed an out-of-bounds access in the reliable sequenced pipeline.
  • Fixed spelling and broken links in the documentation.

Upgrade guide

[0.2.1-preview.1] - 2019-11-28

New features

Changes

Fixes

  • Added missing bindings for Linux and Android

Upgrade guide

[0.2.0-preview.4] - 2019-11-26

New features

Changes

  • Added support for unquantized floats to DataStream class.
  • Added NetworkConfigParameter.maxFrameTimeMS so you to allow longer frame times when debugging to prevent disconnections due to timeout.
  • Allow "1.1.1.1:1234" strings when parsing the IP string in the NetworkEndPoint class, it will use the port part when it's present.
  • Reliable pipeline now doesn't require parameters passed in (uses default window size of 32)
  • Added Read/Write of ulong to DataStream.
  • Made it possible to get connection state from the parallel NetworkDriver.
  • Added LengthInBits to the DataStreamWriter.

Fixes

  • Do not push data events to disconnected connections. Fixes an error about resetting the queue with pending messages
  • Made the endian checks in DataStream compatible with latest version of burst.

Upgrade guide

[0.1.2-preview.1] - 2019-07-17

New features

  • Added a new Ping-Multiplay sample based on the Ping sample
    • Created to be the main sample for demonstrating Multiplay compatibility and best practices (SQP usage, IP binding, etc.)
    • Contains both client and server code. Additional details in readme in /Assets/Samples/Ping-Multiplay/.
  • DedicatedServerConfig: added arguments for -fps and -timeout
  • NetworkEndPoint: Added a TryParse() method which returns false if parsing fails
    • Note: The Parse() method returns a default IP / Endpoint if parsing fails, but a method that could report failure was needed for the Multiplay sample
  • CommandLine:
    • Added a HasArgument() method which returns true if an argument is present
    • Added a PrintArgsToLog() method which is a simple way to print launch args to logs
    • Added a TryUpdateVariableWithArgValue() method which updates a ref var only if an arg was found and successfully parsed

Changes

  • Deleted existing SQP code and added reference to SQP Package (now in staging)
  • Removed SQP server usage from basic Ping sample
    • Note: The SQP server was only needed for Multiplay compatibility, so the addition of Ping-Multiplay allowed us to remove SQP from Ping

Fixes

  • DedicatedServerConfig: Vsync is now disabled programmatically if requesting an FPS different from the current screen refresh rate

Upgrade guide

[0.1.1-preview.1] - 2019-06-05

New features

  • Moved MatchMaking to a package and supporting code to a separate folder.

Fixes

  • Fixed an issue with the reliable pipeline not resending when completely idle.

Upgrade guide

[0.1.0-preview.1] - 2019-04-16

New features

  • Added network pipelines to enable processing of outgoing and incomming packets. The available pipeline stages are ReliableSequencedPipelineStage for reliable UDP messages and SimulatorPipelineStage for emulating network conditions such as high latency and packet loss. See the pipeline documentation for more information.
  • Added reading and writing of packed signed and unsigned integers to DataStream. These new methods use huffman encoding to reduce the size of transfered data for small numbers.

Changes

  • Enable Burst compilation for most jobs
  • Made it possible to get the remote endpoint for a connection
  • Replacing EndPoint parsing with custom code to avoid having a dependency on System.Net
  • Change the ping sample command-line parameters for server to -port and -query_port
  • For matchmaking - use an Assignment object containing the ConnectionString, the Roster, and an AssignmentError string instead of just the ConnectionString.

Fixes

  • Fixed an issue with building iOS on Windows
  • Fixed inconsistent error handling between platforms when the network buffer is full

Upgrade guide

Unity 2019.1 is now required.

BasicNetworkDriver has been renamed to GenericNetworkDriver and a new UdpNetworkDriver helper class is also available.

System.Net EndPoints can no longer be used as addresses, use the new NetworkEndpoint struct instead.