Shadows in the High Definition Render Pipeline
The High Definition Render Pipeline’s Lights can cast shadows from one GameObject onto another. They emphasize the position and scale of GameObjects, which adds a degree of depth and realism to a Scene that could otherwise look flat.
Shadow map resolution
The resolution of a Light’s shadow map determines the size of its shadow maps. The larger the shadow map, the more precise the shadows can be, and the better the High Definition Render Pipeline (HDRP) can capture small details in the shadow casting geometry. Rendering shadow maps at higher resolutions make them look sharper.
Set the resolution of a specific Light’s shadow map in the Shadows section of the Light component.
The number of shadow maps HDRP renders per Light depends on the Type of the Light:
- A Spot Light renders one shadow map.
- A Point Light renders six shadow maps (the number of faces in a cubemap).
- A Directional Light renders one shadow map per cascade. Set the cascade count of Directional Lights from the HD Shadow Settings of your Scene’s Volumes. The default value is four cascades.
HDRP renders all real-time shadows for a frame using a shadow map atlas for all punctual light shadows, and another shadow map atlas for Directional Light shadows.
Set the size of these atlases in your Unity Project’s HDRP Asset. The atlas size determines the maximum resolution of shadows in your Scene.
For example, the default size of an atlas is 4096 x 4096, which can fit:
- Sixteen shadow maps of 1024 x 1024 pixels.
- Two shadow maps of 2048 x 2048 plus four shadow maps of 1024 x 1024 plus eight shadow maps of 512 x 512 plus 32 shadow maps of 256 x 256.
Controlling the maximum number of shadows on screen
In addition to the atlases, you can also set the maximum number of shadow maps HDRP can render in a single frame. To do this, open your Unity Project’s HDRP Asset, navigate to the Shadows section, and enter a Max Shadows on Screen value. If the number of shadow maps on screen is higher than this limit, HDRP does not render them.
Shadow maps are essentially textures projected from the point of view of the Light. HDRP uses a bias in the projection so that the shadow casting geometry does not self-shadow itself.
In HDRP, each individual Light component controls its own shadow biasing using the following parameters:
- Near Plane
- Slope-Scale Depth Bias
- Normal Bias
Find these settings under the Shadows section. If some of the property fields are missing, click the more options cog to expose them. For details on how each property controls the shadow biasing, see the Light documentation.
Using high shadow bias values may result in light "leaking" through Meshes. This is where there is a visible gap between the shadow and its caster and leads to shadow shapes that do not accurately represent their casters.
After HDRP captures a shadow map, it processes filtering on the map in order to decrease the aliasing effect that occurs on low resolution shadow maps. Different filters affect the perceived sharpness of shadows.
To change which shadow filter quality to use, change the Filtering Quality property in your Unity Project’s HDRP Asset. Higher quality have impact on GPU performance. There are currently three filter quality presets for directional and punctual lights. For information on the available filter qualities, see the Filtering Qualities table.
HDRP supports two Mixed Lighting Modes:
To use shadowmasks in HDRP, you must enable shadowmask support in your Unity Project’s HDRP Asset and then make your Cameras use shadowmasks in their Frame Settings :
- Under Render Pipeline Supported Features, enable the Shadowmask checkbox. This enables support for shadowmasks in your Unity Project.
- Next, you must make your Cameras use shadowmasks. In your HDRP Asset, navigate to Default Frame Settings > Lighting and enable the Shadowmask checkbox to make Cameras use shadowmasks by default.
Specific settings in HDRP
For flexible lighting setups, HDRP allows you to choose how you want the shadowmasks to behave for each individual Light. You can change the behavior of the shadowmask by changing a Light’s Shadowmask Mode. Set the Light’s Mode to Mixed to expose Shadowmask Mode in the Shadow Map drop-down of the Shadows section.
|Distance Shadowmask||Makes the Light cast real-time shadows for all GameObjects when the distance between the Camera and the Light is less than a punctual light’s Fade Distance. See below for the alternative distance property that Directional Lights use. When the distance between the Light and the Camera is greater than the Fade Distance, HDRP stops calculating real-time shadows for the Light. Instead, it uses shadowmasks for static GameObjects, and non-static GameObjects do not cast shadows.|
|Shadowmask||Makes the Light cast real-time shadows for non-static GameObjects only. It then combines these shadows with shadowmasks for static GameObjects when the distance between the Camera and the Light is less than the Fade Distance. When the distance between the Light and the Camera is greater than the Fade Distance, HDRP stops calculating real-time shadows for the Light. Instead, it uses shadowmasks for static GameObjects and non-static GameObjects do not cast shadows.|
Directional Lights do not use Fade Distance. Instead they use the Max Distance property located in the HD Shadow Settings of your Scene’s Volumes.
Distance Shadowmask is more GPU intensive, but looks more realistic because real-time lighting that is closer to the Light is more accurate than shadowmask textures with a low resolution chosen to represent areas further away.
Shadowmask is more memory intensive because the Camera uses shadowmask textures for static GameObjects close to the Camera, requiring a larger resolution shadowmask texture.
Shadow Update Mode
You can use Update Mode to specify the calculation method HDRP uses to update a Light's shadow maps. The following Update Modes are available:
|Every Frame||HDRP updates the shadow maps for the light every frame.|
|On Enable||HDRP updates the shadow maps for the light whenever you enable the GameObject.|
|On Demand||HDRP updates the shadow maps for the light every time you request them. To do this, call the RequestShadowMapRendering() method in the Light's HDAdditionalLightData component.|
The High Definition Render Pipeline (HDRP) uses shadow caching to increase performance by not unnecessarily updating the shadow maps for Lights. HDRP has shadow atlases for punctual, area, and directional Lights, as well as separate shadow atlases specifically for cached punctual and cached area Lights. For cached directional Lights, they use the same atlas as normal directional Lights. A Light's Update Mode determines whether or not HDRP caches its shadow map:If you set a Light's Update Mode to OnEnable or OnDemand, HDRP caches the Light's shadow map.If you set a Light's Update Mode to Every Frame, HDRP does not cache the Light's shadow map. When a Light that caches its shadows renders its shadow map for the first time, HDRP registers it with the cached shadow manager which assigns the shadow map to a cached shadow atlas. In the case of directional Lights, HDRP uses the same shadow atlas for cached and non-cached directional Lights.
If the Light's Update Mode is set to OnDemand, you can manually request HDRP to update the Light's shadow map. To do this, access the Light's HDAdditionalLightData component and call the
RequestShadowMapRendering function. Also, if the Light has multiple shadows (e.g. multiple cascades of a directional light), you can request the update of a specific sub-shadow. To do this, use the
For a Light that does cache its shadows, if you disable it or set its Update Mode to Every Frame, you can tell HDRP to preserve the Light's shadow map's place in the cached shadow atlas. This means that, if you enable the Light again, HDRP does not need to re-render the shadow map or place it into a shadow atlas. For information on how to make a Light preserve its shadow map's place in the cached shadow atlas, see Preserving shadow atlas placement.
Customising shadow caching
HDRP caches shadow maps for punctual Lights into one atlas, area Lights into another, and directional Lights into the same atlas as non-cached Directional Lights. You can change the resolution of the first two cached shadow atlases independently of one another. To do this:
- Select an HDRP Asset to view it in the Inspector.
- For punctual lights, go to Lighting > Shadows > Punctual Light Shadows. For area lights, go to Lighting > Shadows > Area Light Shadows.
- Set the value for Cached Shadow Atlas Resolution to the value you want. To help with shadow atlas organisation, try to keep the resolution of individual shadow maps as a multiple of 64. For the most optimal organisation, set the same resolution to as many shadow maps as possible.
If the shadow atlas is full when a Light requests a spot, the cached shadow manager does not add the Light's shadow map and thus the Light does not cast shadows. This means that it is important to manage the space you have available. To check if a Light can fit in the shadow atlas, you can use the
HDCachedShadowManager.instance.WouldFitInAtlas helper function. To see if a Light already has a place in the atlas or if it is waiting for one, the Render Pipeline Debug window includes an option which logs the status of the cached shadow atlas. To use this:
- Click menu: Window > Render Pipeline > Render Pipeline Debug.
- Go to Lighting > Shadows.
- Click the Log Cached Shadow Atlas Status button. This prints a message to the Console window which describes whether a Light has a place in the atlas or is waiting for one.
After a Scene loads with all the already placed Lights, if you add a new Light with cached shadows to the Scene, HDRP tries to place it in order to fill the holes in the atlas. However, depending on the order of insertion, the atlas may be fragmented and the holes available are not enough to place the Light's shadow map in. In this case, you can defragment the atlas to allow for additional Lights. To do this, pass the target atlas into the following function:
Note that this causes HDRP to mark all the shadow maps in the atlas as dirty which means HDRP renders them the moment their parent Light becomes visible.
Preserving shadow atlas placement
If you disable the Light or change its Update Mode to Every Frame, the cached shadow manager unreserves the Light's shadow map's space in the cached shadow atlas and HDRP begins to render the Light's shadow map to the normal shadow atlases every frame. If the cached shadow manager needs to allocate space on the atlas for another Light, it can overwrite the space currently taken up by the original Light's shadow map.
If you plan to only temporarily set a Light's Update Mode to Every Frame and want to set it back to On Enable or On Demand later, you can preserve the Light's shadow map placement in its atlas. This is useful, for example, if you want HDRP to cache a far away Light's shadow map, but update it every frame when it gets close to the Camera. To do this, access the Light's HDAdditionalLightData component and enable the preserveCachedShadow property. If this property is set to
true, HDRP preserves the Light's shadow map's space in its shadow atlas. Note that even if this property is enabled, if you destroy the Light, it loses its placement in the shadow atlas.
While you are in the Unity Editor, HDRP updates shadow maps whenever you modify the Light that casts them. In a built application, HDRP refreshes cached shadow maps when you change different properties on the Light or when you call one of the following functions:
- SetShadowUpdateMode() or shadowUpdateMode. In this case, HDRP only refreshes the cached shadow maps if the mode changes between Every Frame and not Every Frame).
Be aware that anything that is view-dependent is likely to create problems with cached shadow maps because HDRP does not automatically update them as the main view moves. A non-obvious example of this is tessellation. Because tessellation factor is view-dependent, the geometry that the main camera sees might mismatch the geometry that HDRP rendered into the cached shadow map. If this visibly occurs, trigger a request for HDRP to update the Light's shadow map. To do this, make sure the Light's Update Mode is set to On Demand and call
Contact Shadows are shadows that HDRP ray marches in screen space, inside the depth buffer, at a close range. They provide small, detailed, shadows for details in geometry that shadow maps cannot usually capture.
For details on how to enable and customize Contact Shadows, see the Contact Shadows override documentation.
Only one Light can cast Contact Shadows at a time. This means that, if you have more than one Light that casts Contact Shadows visible on the screen, only the dominant Light renders Contact Shadows. HDRP chooses the dominant Light using the screen space size of the Light’s bounding box. A Direction Light that casts Contact Shadows is always the dominant Light.