Change log

[0.5.0] - 2020-10-01

New features

Added RpcSystem.DynamicAssemblyList which can be used to delay the checksums for RPCs and ghost components when the set of assemblies are different on the client and server.
Added to RPC and Command the possiblity to send Entity reference from both client and server.

Changes

Change the system ordering to be compatible with latest physics. NetworkTimeSystem has moved to ClientInitializationSystemGroup. The SimulationSystemGroup runs GhostSpawnSystemGroup (client), GhostReceiveSystemGroup and GhostSimulationSystemGroup before FixedStepSimulationSystemGroup where physics is running. RpcCommandRequestSystemGroup, RpcSystem and GhostSendSystem (server) is running at the end of the frame, after all simulation code. Other systems has been moved into one of the groups.
Created a new GhostInputSystemGroup where systems adding inputs to the input buffer should run.

Fixes

Upgrade guide

The systems adding input to the ICommandData buffer needs to be moved to GhostInputSystemGroup

[0.4.0] - 2020-09-10

New features

Code gen support for ICommandData, serialization for command data can now be generated instead of hand-written. You can opt out of code generation by adding [NetCodeDisableCommandCodeGen].
NetCodeConversionSettings has a new Client And Server mode, which makes it possible to build a single standalong build supporting both client and server.
There is a new static method to generate predicted spawn version of a prefab, GhostCollectionSystem.CreatePredictedSpawnPrefab.

Changes

When not using code-gen for rpcs or commands the systems for registering them (the ones extending RpcCommandRequestSystem<TActionSerializer, TActionRequest>, CommandSendSystem<TCommandDataSerializer, TCommandData> and CommandReceiveSystem<TCommandDataSerializer, TCommandData>) need some more code to setup the jobs.
The ICommandData interface no longer takes an additional generic type.
Added a CommandSendSystemGroup and a CommandReceiveSystemGroup which can be used for dependencies when generating code for ICommandData.
Moved the GameObjects used for authoring to a separate assembly.
Fixed tickrate on the client is no longer supported. This also means that the render interpolation has been removed.
Using multiple rendering clients in the editor is no longer supported, thin clients are still supported.
The GhostPrefabCollectionComponent now only contains a single prefab list, and the GhostPrefabBuffer for it is attached to the same entity.

Deprecated

Deprecated ConvertToClientServerEntity, please use the sub-scene conversion workflow instead.

Fixes

Fixed a compile error in the generated code for components containing multiple ghosted Entity references.
Fixed a bug where predicted spawn ghosts were not destroyed on mis-prediction.
Fixed a bug where data for child entities on predicted ghosts could be corrupted.

Upgrade guide

The predicted spawn code must switch to using the new GhostCollectionSystem.CreatePredictedSpawnPrefab utility method since there is only a single prefab on the client and it requires some patching before it can be used.
When using the GhostPrefabCollectionComponent to find a prefab to find a ghost prefab on the server you must change the code to read the GhostPrefabBuffer from the same entity as GhostPrefabCollectionComponent.
If you are using fixed tickrate mode on the client you need to remove the creation of the FixedClientTickRate singleton and remove the CurrentSimulatedPosition and CurrentSimulatedRotation if using them.
If you are using "Num Clients" in the PlayMode tools you need to move to using "Num Thin Clients" instead.
RPCs not using code-gen needs to add more code to the RpcCommandRequestSystem. The new implementation should look like this: c# class MyRequestRpcCommandRequestSystem : RpcCommandRequestSystem<MyRequestSerializer, MyRequest> { [BurstCompile] protected struct SendRpc : IJobEntityBatch { public SendRpcData data; public void Execute(ArchetypeChunk chunk, int orderIndex) { data.Execute(chunk, orderIndex); } } protected override void OnUpdate() { var sendJob = new SendRpc{data = InitJobData()}; ScheduleJobData(sendJob); } }
The Tick property in ICommandData now requires both a getter and a setter.
ICommandData structs no longer need serialization or implementaions of CommandSendSystem and CommandReceiveSystem if you are using code-gen, and the interface changed from ICommandData<T> to ICommandData.
When manually writing serialization code for ICommandData you need to move the serialization code to a struct implementing ICommandDataSerialize<T>, and the CommandSendSystem and CommandReceiveSystem implementations need code to schedule the jobs like this: c# public class MyCommandSendCommandSystem : CommandSendSystem<MyCommandSerializer, MyCommand> { [BurstCompile] struct SendJob : IJobEntityBatch { public SendJobData data; public void Execute(ArchetypeChunk chunk, int orderIndex) { data.Execute(chunk, orderIndex); } } protected override void OnUpdate() { var sendJob = new SendJob{data = InitJobData()}; ScheduleJobData(sendJob); } } public class MyCommandReceiveCommandSystem : CommandReceiveSystem<MyCommandSerializer, MyCommand> { [BurstCompile] struct ReceiveJob : IJobEntityBatch { public ReceiveJobData data; public void Execute(ArchetypeChunk chunk, int orderIndex) { data.Execute(chunk, orderIndex); } } protected override void OnUpdate() { var recvJob = new ReceiveJob{data = InitJobData()}; ScheduleJobData(recvJob); } }

[0.3.0-preview.3] - 2020-08-21

New features

New workflow for generating serialization code for ghosts. In the new workflow code is generated per component and there is no codegen per ghost type prefab.
- The ghost fields and ghost components are now configured in code with GhostField and GhostComponent attributes where you can configure parameters for prediction, interpolation, quantization and so on.
- The ghost component and collection inspectors now only show you how the ghosts have been configured in code.
- Ghosts can now be generated on demand and you don't need to explicitly push a button to do it.
- A new ghost compiler windows allows you to change how the generation is handled, like changing from on demand generation to manual) and shows you if any ghost is out of sync.
Code gen support for RPCs, an RPC can be created without writing serialization by hand. Implement the IRpcCommand interface and write it like you would a regular IComponentData - the serialization code will be generated for you.
GhostGroups are now supported. A ghost prefab can have a GhostGroup buffer added to it at authoring time, all ghosts listed in that buffer are guaranteed to be sent together with the main entity. In order to be in a group the child ghost must have the GhostChildEntityComponent component added to it. The GhostChildEntityComponent can be added at runtime when moving the child entity into the group.
Relevancy support has been added. By changing GhostSendSystem.GhostRelevancyMode to GhostRelevancyMode.SetIsRelevant or GhostRelevancyMode.SetIsIrrelevant on the server and adding ghosts to GhostSendSystem.GhostRelevancySet you can limit the set of ghosts which are sent to a specific client.
Added an optimization mode to ghosts, the new static optimization mode will use less aggressive delta compression which allows us to stop sending data completely when no entities in a chunk have been modified.
Added visualization of prediction errors to the NetDbg.
A connection entity on the server can have a NetworkStreamSnapshotTargetSize which is used to control the target size for snapshots.
Added GhostReceiveSystem.GhostCountOnServer and GhostReceiveSystem.GhostCountOnClient which can be used to check how many ghosts a client should have and how many it does have.

Changes

Support for NativeString64 has been replaced by support for FixedString64. Support for FixedString32, FixedString128, FixedString512 and FixedString4096 has also been added.
In dynamic timestep mode it is now possible to resume prediction from the last full predicted tick instead of rolling back to the latest received snapshot when no new data has been received.
Added a DisableLagCompensationComponent which when added as a singleton prevents the lag compensation system from running.

Fixes

Quaternions are renormalized after dequantization to make sure they are still valid rotations.
Floats are rounded to the nearest int after quantization to improve acuracy.
It is now possible to send more than one packet with RPC commands per frame, previously commands could be silently dropped when doing that.

Upgrade guide

NativeString64 is no longer uspported, change your code to use FixedString64 instead.
GhostUpdateSystemGroup no longer exists, references to it for update order should be replaced with GhostUpdateSystem
NetCode now requires Unity 2020.1.2.

New ghost workflow

Change all [GhostDefaultField] to [GhostField] and all [GhostDefaultComponent] to [GhostComponent] in your components. The parameters to the constructors have also changed, you need to specify [GhostField(Quantization=100, Interpolate=true)] instead of [GhostDefaultField(100, true)].
For all ghosts which manually adds fields you must add GhostField attributes to the component since manual overrides are no longer supported.
For all ghosts which removes a component from Server, Interpolated Client or Predicted Client you must add a [GhostComponent(PrefabType=<type>)] attribute to the component where <type> matches what you had before.
For all components which you do not want to synchronize when they are on child entities of a ghost you need to add [GhostComponent(SendDataForChildEntity = false)].
Open all prefabs and verify that Name, Importance and Default ghost mode are still correct. Supported Ghost Mode and Optimization Mode are new fields and the default values matches what the old workflow did.
For all ghosts which uses the owner predicted mode you must add a GhostOwnerComponent and make sure your code sets the NetworkId of that component correctly. Previously you could store the network id in any component and point the GhostAuthoringComponent to it.
For all components which you were only being sent to either interpolated or predicted ghosts when used on owner predicted ghosts you need to add [GhostComponent(OwnerPredictedSendType = <type>)] where <type> is either GhostSendType.Interpolated or GhostSendType.Predicted.
Delete the generated code from the old NetCode version.
If you are using predictive spawning the new way to request a predictive spawn is to instantiate the predicted client version of the ghost prefab and add a PredictedGhostSpawnRequestComponent to the entity.
Any custom spawn behavior - including matching entities for pre-spawned ghosts - previously implemented in MarkPredictedGhosts must be moved to a spawn classification system.
Any custom code to modify spawned ghosts previously implemented in UpdateNewPredictedEntities or UpdateNewInterpolatedEntities must be moved to systems running in the GhostSpawnSystemGroup after GhostSpawnSystem. Use tag components to deterct which ghosts are new.

RPC

If your IRpcCommand component only uses RpcExecutor.ExecuteCreateRequestComponent in the execute method you can remove the implementations for Serialize, Deserialize, CompileExecute along with the execute method and burst function pointer for it. You also need to remove the CommandRequestSystem implementationf for your component. All of those will be generated by code-gen.
All RPC implementations which still needs manual serialization or execute must be changed to implement public struct MyRequest : IComponentData, IRpcCommandSerializer<MyRequest> instead of public stuct MyRequest : IRpcCommand.
The signature for RPC serialization has changed to void Serialize(ref DataStreamWriter writer, in MyRequest data) and deserialization has changed to void Deserialize(ref DataStreamReader reader, ref MyRequest data).
The CommandRequestSystem for rpcs with manual serialization/execute must be changed from class MyRequestCommandRequestSystem : RpcCommandRequestSystem<MyRequest> to class MyRequestCommandRequestSystem : RpcCommandRequestSystem<MyRequest, MyRequest>

[0.2.0-preview.5] - 2020-06-05

New features

Support for pre-spawned ghosts. When prefab ghost instances are placed into subscenes they will be present on server and clients when they load the scene. They are then automatically connected together and will work just like normally spawned ghosts after that.

Changes

Changed how snapshot size is limited to make it more robust and give more clear errors.
Added Name field to the GhostAuthoringComponent which is used during code generation to identify the ghost prefab. By default this is the prefab name but can be changed.
ClientServerBoostrap now correctly use two-phase initialization to initialise all the systems
Changed PhysicsWorldHistory.CollisionHistoryBuffer to return a safe memory reference to the CollisionHistoryBuffer instead of copy a large amount of data on the stack.
Upgrade to Entities 0.11

Fixes

Fixed issue with ghost prefabs when they were Variant or Model Prefabs.
Fixed issue with datastream going out of sync when snapshot desync was detected
Fixed an issue with RegisterRPC in case you try to register a malformed RPC with an invalid pointer
Fixed an issue with ServerTick that does not monotonically increase in presence of high ping
Fixed an issue with ClientServerTickRate being created multiple times if the client connect and disconnect from the server
Fixed an issue with ClientServerTickRate not reused by the client if it was already present in the world
Fixed an issue with ClientServerBootstrap and the fact TypeManager was not initialised when we generate client/server world's the system lists

Upgrade guide

A Name field was added to the GhostAuthoringComponent and as a result all prefabs with this component need to be opened and close to serialize the field. It's used as a prefix name during code generation so it might also be neccessary to press the Generate Code button again

[0.1.0-preview.6] - 2020-02-24

New features

Added integration with UnityPhysics, including the lag compensation from DotsSample. To use it you must have the UnityPhysics added to your project.

Changes

Unity Transport has been upgraded to 0.3.0 which required some API changes - see "Upgrade guide".
All FunctionPointer instances are cached in statics to reduce the number of calls to compile.
The helper method RpcExecutor.ExecuteCreateRequestComponent returns the entity it creates.
Added an interface to NetworkStreamReceiveSystem which is used when creating the driver. It is possible to set NetworkStreamReceiveSystem.s_DriverConstructor to a custom instance during bootstrapping to create drivers in a custom way.
Removed World.Active workaround since it has been deprecated for a while and is causing problems with conversion at runtime.
Slightly improved performance by ensuring that all jobs that can be Burst compiled are
Ghost types are now selected based on the guid of the ghosts prefab asset instead of the archetype. This makes it possible to have multiple different ghosts with the same archetype. If a ghost is not a valid prefab you will get an error during conversion.

Fixes

Fixed an issue where ghost prefabs created from GameObject instances were processed by all systems.
The code gen now only writes files if they are modified.
Disposing a client or server world will now unregister it from the tick system to prevent errors.
Take the latency of command age updates into account when calculating time scale to get more stable inputs with high ping.

Upgrade guide

Unity Transport has been upgraded to 0.3.0 which changes the API for DataStreamReader and DataStreamWriter.

The IRpcCommand and ICommandData have been changed to not take a DataStreamReader.Context.

The ISnapshotData and GhostCollection interfaces have been changed to not take a DataStreamReader.Context, all ghosts and collections must be regenerated.

GhostDistanceImportance.NoScale and GhostDistanceImportance.DefaultScale have been replaced by GhostDistanceImportance.NoScaleFunctionPointer and GhostDistanceImportance.DefaultScaleFunctionPointer which are compiled function pointers rather than methods.

[0.0.4-preview.0] - 2019-12-12

New features

Changes

Changed the codegen for NativeString64 to use the serialization in DataStream.

Fixes

Upgrade guide

[0.0.3-preview.2] - 2019-12-05

New features

Changes

Updated the documentation and added a section about prediction.
Upgraded entities to 0.3.0.

Fixes

Fixed a crash when multiple clients disconnected on the same frame.
Fixed read / write access specifiers in AfterSimulationInterpolationSystem.
Fixed build errors in non-development standalone builds.

Upgrade guide

[0.0.2-preview.1] - 2019-11-28

New features

Changes

Fixes

Fix compile error in generated serialization code for strings.
Fix warning when entering playmode with the netcode disabled.

Upgrade guide

[0.0.1-preview.6] - 2019-11-26

New features

Made it possible to scale importance based on distance to support more ghosts.
Nested entities constaining replicated data are now supported.
Entity references now supported as ghost fields. The references are weak references which will resolve to Entity.Null if the target is not guaranteed to exist.
NativeString64, enums and bools are supported as ghost fields.
ClientServerTickRate added where you can configure certain behavior relating to timestepping. A headless server can be configured to sleep after hitting target framerate to conserve CPU usage.
Send different data depending on if the entity is predicted or interpolated, some savings can be done in the predicted case.
Added a protocol version which must match for the connection to succeed.
Added time graphs and server view to the network debugger.
Network simulator now supports jitter.

Changes

The authoring flow has been improved.
- GhostAuthoringComponent now automatically detects what components an entity has after conversion runs and automatically populates them when you press the "Update component list" button. You no longer need to manually type in each component name.
- Default values can be defined for certain component types, for example with Translation components you usually want to synchronize the Value field. When default handling has been defined the ghost authoring component uses that when it parses the entity component list.
- [GhostDefaultField] attribute added. This can be added to ghost variable which are to be synchronized. The GhostAuthoringComponent detects these fields.
- [GhostDefaultComponent] attribute added. This can be used to define default behavior for how a component should be synchronized, InterpolatedClient, PredictedClient and Server.
- GhostCollectionAuthoringComponent added. This is where all spawned prefabs can be registered
- Paths are easier in general as you can set up the root of where you want generated files placed and defaults can be specified in code.
- Which components result in variable data being replicated are marked in bold in the inspector, so it's easier to see how much data will be sent per ghost.
Improved snapshot prediction handling
- Uses the servers delta times now instead of the clients.
- Support for dynamic timestep and fractional tick prediction.
- Handles stalls and won't try to replay to far back in the rollback (64 frames is maximum)
- Less boilerplate code needed to setup a predicted entity, more default handling moved to code generation
- Added GhostPredictionSystemGroup with better calculations for the currently predicting tick on the client
- Interpolation time is an offset from prediction time to make sure they do not drift.
Multiple inputs are sent together so dropped inputs have less effect on misprediction.
Thin clients added, these use fewer resources than full client simulations so it's easier to test with many clients now.
An RPC heartbeat system was added which only runs when nothing is being sent from the client to the server, preventing a disconnect timeout from happening. As soon as inputs are sent and snapshot synchronization starts, the system stops running.
RPC boilerplate code reduced, when a component inheritingIRpcCommandRequestComponentData is added to an entity along with SendRpcCommandRequestComponent it will be sent automatically.
The client/server world bootstrapping has been simplified, you can now use your own custom bootstrapping more easily and create the client/server worlds depending on which one you want at runtime. By default the world creation in the editor is controlled by the playmode tools.
NetCodeConversionSettings added which makes it possible to specify which type of build you want (client/server) in the subscene build settings workflow.
Detect when ackmask desyncs occur
Improved ghost code generation to make it able to regenerate code when there are compile errors.
Snapshots are now acknowleged when there is no CommandSendSystem.
Use the entities TimeData struct instead of getting time from Client/ServerSimulationSystemGroup

Fixes

The code generation in Ghost Authoring Components now generate imports for user namespaces.
Code generation triggers an asset database refresh so the modified files are compiled.
Command inputs now correctly respects the NetworkStreamInGame being present before starting transmission.
Acks can now arrive with bigger interval than 64 ticks
Generated code no longer requires unsafe code to be enabled in the project.

Upgrade guide

Unity 2019.3 is now required (beta 11 minimum) and Entities 0.2.0-preview.
The NetCode folder was moved to a proper package, com.unity.netcode which should now be used instead.
All the netcode was moved to a Unity.NetCode namespace.
[NotClientServerSystem] attribute removed, use [UpdateInWorld(UpdateInWorld.TargetWorld.Default)] instead, it will do the same thing.
GhostPrefabAuthoringComponent removed, use the new GhostCollectionAuthoringComponent instead for setting up ghost data.
ClientServerSubScene removed, it's not needed anymore.
NetworkTimeSystem.predictTargetTick removed, use GhostPredictionSystemGroup.PredictingTick instead.
The interface for RPCs has changed and they no longer require a generated collection.

[0.0.1-preview.2] - 2019-07-17

New features

Added a prefab based workflow for specifying ghosts. A prefab can contain a GhostAuthoringComponent which is used to generate code for a ghost. A GhostPrefabAuthoringComponent can be used to instantiate the prefab when spawning ghosts on the client. This replaces the .ghost files, all projects need to be updated to the new ghost definitions.
Added ConvertToClientServerEntity which can be used instead of ConvertToEntity to target the client / server worlds in the conversion workflow.
Added a ClientServerSubScene component which can be used together with SubScene to trigger sub-scene streaming in the client/ server worlds.

Changes

Changed the default behavior for systems in the default groups to be included in the client and server worlds unless they are marked with [NotClientServerSystem]. This makes built-in systems work in multiplayer projects.
Made standalone player use the same network simulator settings as the editor when running a development player
Made the Server Build option (UNITY_SERVER define) properly set up the right worlds for a dedicated server setup. Setting UNITY_CLIENT in the player settings define results in a client only build being made.
Debugger now shows all running servers and clients.

Fixes

Change World.Active to the executing world when updating systems.
Improve time calculations between client and server.

Upgrade guide

All ghost definitions specified in .ghost files needs to be converted to prefabs. Create a prefab containing a GhostAuthoringComponent and authoring components for all required components. Use the GhostAuthoringComponent to update the component list and generate code.

[0.0.1-preview.1] - 2019-06-05

New features

Added support systems for prediction and spawn prediction in the NetCode. These can be used to implement client-side prediction for networked objects.
Added some support for generating the code required for replicated objects in the NetCode.
Generalized input handling in the NetCode.
New fixed timestep code custom for multiplayer worlds.

Changes

Split the NetCode into a separate assembly and improved the folder structure to make it easier to use it in other projects.
Split the Asteroids sample into separate assemblies for client, server and mixed so it is easier to build dedicated servers without any client-side code.
Upgraded Entities to preview 33.

Fixes

Upgrade guide

[0.0.1-preview.0] - 2019-04-16

New features

Added a new sample asteroids game which we will be using to develop the new netcode.